Question about 1997 Audi A4

1 Answer

Audi a4 tdi stiff gearchange worse when hot 1197 model

Ive just bought a 97 tdi a4 audi.the clutch needed replacing ,noisy release bearing and flywheel worn also the gearchange was stiff and notchy.After clutch been fitted its still stiff and seems worse after driving 5 10 miles.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 197 Answers

Tandard practice to change the oil on a clutch replacement. Was the replacemmiles it's covered, but it's not sounds like the gearbox oil need changing. You don't say how many miles it has done. Gear box oil is not usually changed in a clutch replacement. Did an Audi garage carry out the rlacement? It could be the cable needs adjusting to allow the clutch to have free movement

Posted on Jul 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHEN REPLACING THE CLUTCH ON AN AUDI 1.8 PETROL A4 ESTATE CAR IS THERE ANY NEED TO REPLACE THE FLYWHEEL


I routinely have replaced the flywheel,rear main engine seal, pilot bearing,and input shaft bearing as well as the clutch , pressure plate and throw out bearing,in the last 30 years and have not had a come back.

Jul 19, 2010 | 1999 Audi A4

1 Answer

I drive a 2004 Audi A4 1.8T. It has a 6 speed manual and it is becoming increasingly more difficult to shift gears due to a stiff and notchy gear shifter. I've had the car well maintained and serviced and...


The hard to put into gear is the cause of either a worn or almost worn out clutch or the syncro in the transmission. To test the clutch just observe where the clutch releases. If it releases at the top of the clutch stroke then it most likely is the syncros, if it releases at the bottom (ot too early in the stroke on release) then it is the clutch and you need a new clutch installed. Hope this helps you.

Mar 05, 2010 | Audi A4 Cars & Trucks

1 Answer

Audi a4 2ltr tdi 140. engine has a chatter only when hot . removed aux belt but noise still there. sounds like a pulley chatter. vehicle drives and performs a1.


Just a guess.. could be bearings of (external) belt castors squeaking when hot (= dry). What is the mileage? May need to replace a pulley or so...

I had something like this once with the water pump of my 2,5 TDi and I replaced the pump preventively ($120 I think), problem was solved.

Sep 18, 2009 | 2005 Audi A4

1 Answer

Noisy


Could be low transmission fluid or a noisy clutch release bearing.

Aug 18, 2009 | 2000 Audi A4

1 Answer

Audi a4 1997 tdi gearchange is stiff notchy


Possibly Too Heavy of Gear Oil.

Jul 23, 2009 | 1997 Audi A4

4 Answers

No clutch resistance on audi a4


This sounds like a common Audi problem but its usually in early shape A3s and TTs. If you heard a snap, then possibly the pedal has broken where the clutch master cylinder connects to it. In this case you can just replace the pedal but it can be an early sign of a faulty master cylinder. If the pedal is ok, it maybe the master that has failed and needs replacing. Worse cases, the slave cylinder maybe faulty or even the release bearing could be sticking on the input shaft. Bleeding the brakes will not help, the clutch shares the same fluid and reservoir but is on a different hydraulic system. The clutch would need to be bled from the bleed nipple on the slave cylinder on top of the gearbox. This can be difficult without the car on the ramp, but is worth trying before replacing parts. What engine does it have?

Jan 23, 2009 | 2004 Audi A4

2 Answers

Juddering when i pull away from a standing start.


it sounds like the thrust bearing is on it way out, have you just had a clutch fitted?

Jan 22, 2009 | 2004 Audi A4

2 Answers

Stiff gearchange on 93 vector diesel


A few things can cause your symptoms. Check the slave cylinder, see if the res. is full, any leaks, or if the pedal changes if you pump it. If it checks out then you may need a new pilot bearing, throw-out bearing, and/or clutch assembly.

Jan 21, 2009 | 2003 Saab 9-3

1 Answer

97 Audi A4 Cluth


probably the hydrolic system has not been blead properly

Sep 04, 2008 | 2004 Audi A4

Not finding what you are looking for?
1997 Audi A4 Logo

Related Topics:

753 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14204 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...