Question about 1994 Mazda 323

2 Answers

Timing belt settings

I am trying to find the timing belt settings on a '97 dodge intrepid 3.5?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 5,568 Answers

Double-check this; if you get it wrong, you could severely damage your engine.
I always rotate the engine by hand (turning the crankshaft) to re-check timing marks position before trying to start the engine. This way, if the valves are out of time, you will notice it when the crank stops dead and no damage is likely to result doing it this first.

Posted on Jul 23, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,392 Answers

Here is one pic of the timing marks. The cams get lined up with the dots on the back of the timing cover. The one on the cam goes in between the 2 dots.timing belt settings - 78226419

Posted on Jul 23, 2009

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

motor1258
  • 6674 Answers

SOURCE: 97 timing belt for a

This should help you. Click on link.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528006a96f

Posted on Dec 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

'97 dodge inteprid 3.5. Just replaced the timing belt and I can't get the cam marks to line up with the rear covers. Do they eventually line up?


If the belt is installed and tensioner set, and the marks do not line up, you will need to do it over. All three marks, crankshaft and both camshafts, MUST be lined up for the valve timing to be correct. Once set properly, they will not change. Every two revolutions of the crankshaft, all three marks should again line up exactly.

Nov 12, 2016 | 1997 Dodge Intrepid

Tip

How To Change a Timing Belt Dodge Intrepid 1995-97 1AAuto.com


How To Change a Timing Belt Dodge Intrepid 1995-97 1AAuto.com

on Sep 21, 2011 | 1997 Dodge Intrepid

1 Answer

Misfiring


have u tryed to replace the camshaft sensor i had the same problem with my 97 intrepid today and itworks like a dream now.

Jul 28, 2010 | 1997 Dodge Intrepid

1 Answer

97 intrepid shut off fine last night, today will


sounds like a fuel pump or maybe check on the asd relay or fuel pump relay try taking them off and tap on them then try to start if no start sounds like a fuel pump or timing belt issue. good luck

Jan 05, 2010 | 1997 Dodge Intrepid

1 Answer

How to you install a water pumpon a 3.5 97 dodge


Remove the hood bracket bar, 4bolts, then the fan shroud assembly, then the belts, belt adjuster, and timing covers, line up the cam gears, crank gear to the marks , cam has 1 dot, they line up to timing housing 2 dots, (single dot to middle of the 2 dots), crank has 1 dot to mark on the oil pump housing to your right of crank gear, thats TDC. now remove the timing belt tensioner, 2 bolts, and remove the belt, if the pump has leaked, replace the belt, and tensioner if it is NOT metal Pulley, the fibre one will break down from the antifreeze. its a good idea to replace the water pump housing orings behind it, ac bracket has to come off, as the right cam on engine, this not a retiming iussue with the gear. GOOD LUCK. RDJRP

Aug 17, 2009 | 1997 Dodge Intrepid

1 Answer

97 dodge intripid accs belt frayed ( alt.ster.etc.) not a/c bel


I have a 97' intrepid 3.3 liter there is a tension pulley that moves. No need to loosen any nuts or bolts any where.

May 26, 2009 | 1997 Dodge Intrepid

1 Answer

97 intrepid timing belt


here a good for online repair with good pictures...www.autozone.com.....just pick make and rest..then on top left type what part ..product search .. you want hit go..click on the part.. then scroll down . at the bottom of the you will see repair manuals just click on it..

Dec 09, 2008 | 2002 Dodge Intrepid

1 Answer

Timing on 1997 Dodge Intrepid


the timing is done by marks on the crankhaft , and the cams , you can get a printout of timing marks from your dodge dealer.

Jul 22, 2008 | 1997 Dodge Intrepid

Not finding what you are looking for?
1994 Mazda 323 Logo

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...