Question about 1999 GMC Yukon

1 Answer

I have my new iterior door handle for my 1999yukon. How do I replace it

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 132 Answers

Got to take off the door pannel there is 4 screws on the botton and usaly one ing the inner pocket then it pops off and you can replace it.

Posted on Jul 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bypass security for 1999Yukon ,I put a new egnitiontumbler and security don't let truck run shuts off qwik can I bypass this?


Try touching the positive and the negative battery cables together and then hooking them back on battery then this is important 1-- unlock with key (if not locked lock it then unlock all doors with key leave doors open and put key in try to start leave in the on position for ten mins until light stops blinking then try starting it again if it don't start then leave key in on position wait ten more mins and start truck as always hope this helps good luck

Feb 16, 2015 | Cars & Trucks

Tip

How to Replace Door Locks in Cadillac cetera car?


The procedure to replace the door locks in car is as follows:--
1) First of all carefully remove the arm rest and any speaker covers if speakers are connected.
2) Then remove the door panel. The door panel is connected by plastic clips.
3) Then remove the door handle screws with the help of screwdriver.
4) After the screws are removed the door handle will come out
5) Now the interior doors handle needs to be removed. the interior door handle is fitted by plastic clips you can use a pliers to pop out the plastic clip, then twist the clip to allow the interior door handle to swing free and easily come out.
6) Take the door handle out
7) Now in the door remove the rod from lock core.Then remove the two bolts holding the door handle assembly.
8) Now before removing the old door lock, please take note of the position in which it is placed. So while inserting new lock there is no problem about placing the new lock.
9) Insert the new lock carefully to the proper position. And reverse/refit all the parts which you removed while replacing the old door lock.
This will help. Thanks.

on Mar 25, 2010 | Cadillac Catera Cars & Trucks

Tip

How to Replace Door Locks in Eagle Vision ?


The procedure to replace the door locks in car is as follows:--
1) First of all carefully remove the arm rest and any speaker covers if speakers are connected.
2) Then remove the door panel. The door panel is connected by plastic clips.
3) Then remove the door handle screws with the help of screwdriver.
4) After the screws are removed the door handle will come out
5) Now the interior doors handle needs to be removed. the interior door handle is fitted by plastic clips you can use a pliers to pop out the plastic clip, then twist the clip to allow the interior door handle to swing free and easily come out.
6) Take the door handle out
7) Now in the door remove the rod from lock core.Then remove the two bolts holding the door handle assembly.
8) Now before removing the old door lock, please take note of the position in which it is placed. So while inserting new lock there is no problem about placing the new lock.
9) Insert the new lock carefully to the proper position. And reverse/refit all the parts which you removed while replacing the old door lock.
This will help. Thanks.

on Mar 25, 2010 | Eagle Vision Cars & Trucks

1 Answer

Doors all closed and rear iterior light flashes


Your dimmer switch for the instrument lights needs to be reset either brighter or dimmer or the internals of the switch is going bad.and probable the instruments switch needs to be replaced. Have a car electrician check it out.

Mar 24, 2012 | 1995 Jeep Grand Cherokee

Tip

How to Replace Door Locks in Avanti convertible ?


The procedure to replace the door locks in car is as follows:--
1) First of all carefully remove the arm rest and any speaker covers if speakers are connected.
2) Then remove the door panel. The door panel is connected by plastic clips.
3) Then remove the door handle screws with the help of screwdriver.
4) After the screws are removed the door handle will come out
5) Now the interior doors handle needs to be removed. the interior door handle is fitted by plastic clips you can use a pliers to pop out the plastic clip, then twist the clip to allow the interior door handle to swing free and easily come out.
6) Take the door handle out
7) Now in the door remove the rod from lock core.Then remove the two bolts holding the door handle assembly.
8) Now before removing the old door lock, please take note of the position in which it is placed. So while inserting new lock there is no problem about placing the new lock.
9) Insert the new lock carefully to the proper position. And reverse/refit all the parts which you removed while replacing the old door lock.
This will help. Thanks.

on Mar 25, 2010 | Avanti Convertible Cars & Trucks

1 Answer

My iterior light is staying on


THE SWITCHES FOR THOSE LIGHTS ARE IN THE DOOR HANDLES. OPEN THE DOORS LUBRICATE ALL LATCHES IN & AROUND THE DOOR HANDLES, OPEN & CLOSE ALL DOORS SEVERAL TIMES TO WORK IN THE OIL. GOOD LUCK, DR. VOLT

Jan 21, 2011 | 1998 Ford Explorer

1 Answer

I have a susuki forenza and I need to replace the driver's side door handle. I already have the new part (door handle).


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the inner door handle and replace with new one. If it's your outer door handle, pull back the weather seal and disconnect the linkage to the outer door handle and then remove the bolts securing the outer handle to the door

Oct 23, 2009 | 2006 Suzuki Forenza

1 Answer

How to replace a 2003 grand vitara's rear door handle


1. open the rear door
2. open the rear door sidings
3. try loosing the not of the handle
4. remove the steel wirings of the handle
5. install the new rear door handle

Jul 15, 2009 | 2003 Suzuki Vitara

3 Answers

1997 buick park ave 4 door right front door handle won,t work from the outside


Order the exterior door handle AND the clip that attaches the rod to the exterior handle from your local dealership ( any part in the salvage yard will have at least as much wear as the one U are replacing ) Also order a can of touch up paint matching your car. After you have the parts and have painted the new exterior handle, roll down the window and remove the interior door panel. ( instructions have been posted at 'replace door lock buttom' ) Two nuts, one on each side, hold the broken handle in place and must be removed ( DON'T loose them ). Loosen the rod from the clip at the top to allow a bit more room, But take note on the way it is attached ( you will need to reattach the rod to new handle ) To install new mechanism put the new clip on the rod, carefully place the gasket and the new handle in place and install nuts to secure. Test the door handle and make sure it works. Reinstall interior door panel.

Jul 06, 2009 | 1997 Buick Park Avenue

Not finding what you are looking for?
1999 GMC Yukon Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...