Question about 2007 Chevrolet Tahoe

1 Answer

My 2007 chevy tahoe will not turn on and the switch that comes with the keys will not unlock the doors...help

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 490 Answers

If you can get the door open you probably have a bad battery your not getting any power to anything.

Posted on Jul 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why doesn't passenger door unlock with key fob or switch?


Dannie, power lock actuator faulty. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Front Door Lock Actuator Replacement 2007 to 2012 Tahoe Silverado...
How to remove door panel 2008 Chevrolet Silverado 1500 LT better quality
Automatic Power door lock repair 2007 2014 GM Truck Suburban


Mar 30, 2016 | 2008 Chevrolet Chevrolet Avalanche 1500...

1 Answer

How do I open the cargo door if it wont open?


rear door hatch lock repair GMC Chevrolet - YouTube

? 4:26
https://www.youtube.com/watch?v=QS3PMhGgyAg
Apr 5, 2014 - Uploaded by auto resource
2002 Yukon, rear hatch lock not locking. ... rear door hatch lock repair GMC Chevrolet. auto resource ... chevy tahoe lift gate notopening - Duration: 2:12. ... A Method how to unlock your car in 10 seconds :) - Duration: 0:35.

chevy tahoe lift gate not opening - YouTube

? 2:12
https://www.youtube.com/watch?v=xU6ybiY3F4I
Sep 1, 2010 - Uploaded by 76bluemoon
Back lift gate/glass would not open or release. Even when unlocked with the key fob or the unlock switch on the drivers/passenger door. ... How To Install Replace Rear Lift Gate handle 2002-09 GMC Envoy Chevy Trailblazer ...

Jan 16, 2016 | 2002 Chevrolet Tahoe

1 Answer

2007 chevy tahoe touch screen radio will not respond to touch, everything else works fine.


If the electrical contacts that go to the rear door lock are corroded the lock/unlock switch will not work. Spray WD-40 (with the spray wand) from inside the truck into the space between the truck and door on the passenger side. A few squirts near the top and upper side will give enough electrical conductivity to energize the lock.

Oct 29, 2013 | 2007 Chevrolet Tahoe

1 Answer

Battery went dead in 2007 Chevy Silverado truck. Now, remote does not work. Replaced battery in remote and it still does not work.


Make sure you have one working ignition key and all remotes for the vehicle.

1) Close all vehicle doors.
2) Insert the key into the ignition.
3) Hold down the power UNLOCK button on the driver’s door panel-continue to hold down until instructed to release in step 9.
4) Perform steps 5 through 8 in fairly rapid succession.
5) Turn the ignition switch to the ON position (as far as you can go without starting the engine).
6) Turn the ignition switch to the OFF position.
7) Turn the ignition switch to the ON position.
8) Turn the ignition switch to the OFF position.
9) Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.
10) Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.
11) Repeat step 10 NOW for each additional transmitter (including any existing transmitters).
12) Turn the ignition switch OFF then to the ON position in order to exit the transmitter programming mode.

Feb 28, 2010 | 2007 Chevrolet Silverado 1500 2WD

1 Answer

2007 CHEVY TAHOE STUCK IN 4X4 LOW AND DASHBOARD SAYS THAT STABLETRACK IS OFF ...


turn 4x4 switch off put vehicle in neutral then put vehicle in reverse and drive in reverse a couple of feet the put it into drive and it should come off of 4x4 if not then repeat until it comes off

Feb 12, 2010 | 2007 Chevrolet Tahoe

1 Answer

Program a new key fob for a 2002 chevy tahoe


1. Close all vehicle doors.



2. Insert the key into the ignition.


3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold
down until instructed to release in step 9.



4. Perform steps 5 through 8 in fairly rapid succession.


5. Turn the ignition switch to the ON position (as far as you can go without starting the
engine).



6. Turn the ignition switch to the OFF position.


7. Turn the ignition switch to the ON position.


8. Turn the ignition switch to the OFF position.


9. Release the power unlock button on the door panel. The vehicle will lock and unlock
the doors automatically.



10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until
the door locks and unlocks.
This step may take up to 30 seconds.



11. Repeat step 10 NOW for each additional transmitter (including any existing
transmitters).



12. Turn the ignition switch to the ON position in order to exit the transmitter programming
mode.




Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

May 27, 2009 | 2001 Chevrolet Blazer

2 Answers

Alarm problem on 2004 chevy tahoe


you will have to write your vehicles vin number down wich is if you look throught the windshild on the drivers side you will see it its a little plate with numbers but right down the vin number and take you drivers license and Registration with you to the chevy dealer ship and request the remote for that vehicle. and they should be able to get you one. as far as i know the remote is the only way to get the alarm off. I hope this helps you

Mar 21, 2009 | 2004 Chevrolet Tahoe

Not finding what you are looking for?
2007 Chevrolet Tahoe Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...