Question about 1995 Oldsmobile Aurora

2 Answers

Load nosie from pully. pully does not spin right.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,124 Answers

Probably bearins are getting chewed..
Try some penatrating oil (not getting it on the belt) until you can get it replaced.

Posted on Jul 23, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 2,984 Answers

Which pulley is it? If you can replace it, then do so. Usually means the bearings are about shot.

Posted on Jul 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sign of bad tension pully


that's probably a worn pully bearing or if you hear it more at idle in drive then it is the heat shield on the cadilitic converter

Apr 01, 2013 | 2000 Lincoln Navigator

1 Answer

Hello, not sure what happen but, on my way to work today my battery light came on and then went off right when I got to work. When I left work later that evening, not only was my battery light still on,...


you may want to check your crankshaft pully to make sure it does not slip. we were having the same problem with our 2004 kia and the crankshaft pully had lost its pins. so it was just spinning on the crankshaft bolt. its the center pully, the one comeing driectly out of the motor. we found this by opening the hood and turning on the a/c. the drag from the belts turning the a/c on. made the belts squeel slightly and you will see the pully slip under the load of turning on the a/c this takes 2 people. you want to start the car with the hood up a/c off and while the second person watches the center belts and pully have the driver turn on the a/c if the belts squeel or the center pully slipps thats your problem.. also if you have any problem with power steering, lights going out or dimming, battery going low or any function light coming on inside. thats an indicator of this also.. i hope this helps you...

May 22, 2011 | 2004 Kia Optima

1 Answer

Its makin nosie by the belt


put belt spray on it, or change belt if needed. then you can check all pullies for looseness. you may be getting the noise from the idler pully, or the tensioner. have a good day !!

Nov 13, 2010 | 2003 Chevrolet Malibu

1 Answer

I have a knocking nosie on the right side of the car


front wheel drive ? check your CV joints on the right side , drive axles

Nov 02, 2009 | 1999 Ford Taurus

1 Answer

AC pully is not spining fast enough. Can the pully be repaired without changing out the compressor. Even when the AC is turned off pully does not free spin.


Intersting description, I do not understand the "fast enough" part.

If the pulley does not spin freely, something (bearing) is not right and the pulley clutch can be serviced without replacing the compressor.

Oct 10, 2009 | 1994 Toyota Camry

1 Answer

Whinning noise from front of vehicle


check your idler, and tensioner pully's, i've seen a few trailblazers that whine and it turns out to be an idler pully, also check the power steering fluid and make sure its full in accordance with your owners manual

Jul 30, 2009 | 2005 Chevrolet TrailBlazer

2 Answers

Keeps throwing the belt off


I had the exact same problem, except it was shredding the belt as well. It even jumped off the pully after just distance down the road. Come to find out the idler (which had been changed out with what was "supposed" to be the right one) was the wrong one. It looked right, but after changing the idler out we have not had this problem again.

Jul 03, 2009 | 1991 Ford F150

1 Answer

Whineing nosie from rear


is it front or rear wheel drive? i believe its front. well i would say you have a wheel bearing or brake problem. jack up the car and hold wheel top and bottom and see if you can rock it, wheel bearing.
if its brake you will hear it when you spin the wheel.

Mar 29, 2009 | Renault Sportwagon Cars & Trucks

Not finding what you are looking for?
1995 Oldsmobile Aurora Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...