- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Question edited for clarity.
Question moved from Miscellaneous to model category. If you put 'year make model' in FULL as the first 3 words, the Fixya scripts will offer you the correct category.
Are you after the Poly Vinyl Chloride valve, or the Positive Crankcase Ventilation valve? :>)
Front turn signal bulb replacement 2008 SRX . Jack up car & block . Remove front wheel & front half of the wheel house assemble. There are about 7 plastic pull rivets that have to be removed . Pull out the wheel house . Remove turn signal & driving light cover held on by 6 # T10 torx screws . Twist out socket & replace bulb # 3757NAK . Should take about 45 min.
the oil filter is a canisted type and is located under plastic engine cover lift the cover up on top of the motor and its on the driver side , it requires a 1 inch socket to change.
If your SRX has a Northstar V/8 engine the starter is under the intake manifold. The manifold has to be removed to access the starter. Hope this helps, thank you
×