Atc does not work on 1993 concorde - 1993 Chrysler Concorde

that will be a dealer service issue.. they can assist with this one..

Factory wiring diagrams or manuals --order from -- Helm.Com

Another source -- would be to go to a local shop that has ALLDATA
System & have them print what you need

I personally never buy any Haynes,Chilton etc for the reason
you have found out

Spend the big bucks,if your going to work on your own vehicles

You have a 1993 car,it is 18 to 19 years old

If you were the owner of Chrysler, would you
still be spending money, to honor warrantees
18 years later.

Half those vehicles went to the crusher already

you may have a blown fuse check the fuses,if fuses are OK the problem could be the temperature sensor that activates the fan is faulty or it may be a loose wire or a connector plug,check the wiring,pull the connector apart & check for corrosion.....hope this helps.....cheers

YOU HAVE TO REMOVE POSITIVE BATTERY CABLE FROM STARTER SOLENOID.REMOVE THE NUT HOLDING POSITIVE BATTERY CABLE TO SOLENOID.THEN MOVE CABLE FROM SOLENOID.THEN DROP THE STARTER FROM ENGINE.

the alternator is burnt out

internal problem with the heater control assembly,you will need to get one from a salvage yard.

sounds like a vaccume leak not getting full vaccume too the unit!!

check your fuses.

sounds like you have a problem with your alarm system. likely the ignition switch is the problem.