Question about GMC Jimmy

1 Answer

Have 93 GMC Jimmy - AC/Heater Fan Motor blowing fine - then cut in & out and now does not blow. Disabled with Service Dog in FL returning CA - any simple steps/items I can check and where is Fan located - any idea to worst case scenario costs to repair and best case scenario cost? Any mechanic recommendation in Sarasota or Clearwater FL?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 490 Answers

Your blower motor is dead replace it.it located either under the hood in the engine compartment on the fire wall or under the dash on the passengers side.It is not hard to do if you are mecanicaly inclined.cost between $30/$100,if you do it.

Posted on Jul 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ac/heater blower motor fluxuates in speeds blows vary slow then quits!


has a short and needs to be cleaned you can buy canned air at wal-mart to try first

Jun 15, 2012 | 1996 GMC Jimmy

1 Answer

When i get in my jimmy to go to work its blowing hot air( with the heater on of course) and then there is a creaking noise coming from the blower motor area, then the heater will start blowing cold air...


Because the Main Gear in the Blend Motor has cracked or teeth have chipped and is now not keeping the heat/cold door to the Hot position. 3 fixes: Buy a new Blend motor, takes about 5mins to replace. Buy a new Blend Motor Gear, will take about 30mins to fix. Repair current gear with Epoxy, takes about 30mins and 12hrs for the glue to set up strong enough to use it.

Feb 24, 2011 | 1998 GMC Jimmy

3 Answers

We just bought a 1999 GMC Jimmy and the heater doesn't work. The fan blows but there is no heat. The air conditioner works fine.


Could be that the heater core is disconnected, there are two hoses that attach to the heather core that come out of the engine, this provides hot water to the core thus making the heater work, when the heater core starts leaking water the quick and fast fix would be to bypass the heater core and connect the two hoses together, check under the hood on the left passenger side there should be two hoses about 1" thick see if there are connected together or of they seem to be connected to 2 outlets that come out of the inside of the vehicle. people do that specially if selling vehicle.

Sep 06, 2010 | 1999 GMC Jimmy

3 Answers

Everytime i turn my heater on heater on works and blows fuse?


fuse blows. unplug heater blower motor turn ignition on, turn heater on, does fuse blow? if not need to replace heater blower motor

Feb 10, 2010 | 1995 GMC Jimmy

1 Answer

My ac blows hot, it worked a few times after i changed out the ac control switches, blowing cold then hot when changed, anly worked for a few cycles, the does the same


Change the temp door actuator motor on the bottom near the center.It is a flat motor that is mounted under the ac/heater box.

Nov 02, 2009 | 1999 GMC Jimmy

1 Answer

2003 Chevy AC Fan Blower Motor troubleshooting


first check the fuse or relay.. this will be the cheapest sollution and easiest to check.

Jul 31, 2009 | 2003 GMC Sierra 1500

1 Answer

2000 jimmy a/c blows hot computer controlled a/c button light was blue when working now yellow and blowing hot just charged system no change


check to see if ac compressor is turning ,if so look to see if cooling fan/fans are working if not check fuses,and cooling fan relays/if ac is turning and cooling fan/fans are working ,need to put gauges on ac system and check pressures ,if normal ,and ac low side pipe/lines/hoses are cols then it is ur actuator motor for the temp door that is not working

Jul 08, 2009 | 2000 GMC Jimmy

1 Answer

94 GMC Jimmy heater fan not working


if you hear the fans blowing and no heat is coming
then you mite have to replace the heater.

before you try to replace the heater talk to Lords

Dec 04, 2008 | 1994 GMC Jimmy

3 Answers

2000 GMC Heater Problem


I had problems with a similar truck,a 1998 GMC diesel after checking to make sure the control cables were operating the blend door and blowing the mess of the heater core,I replace the thermostats.Still no heat turns out there was a small amount of debris collecting in the fitting for the inlet hose at the thermostat housing after removing it and blowing out the lines the heat was fine.

Nov 19, 2008 | 2000 GMC Jimmy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

541 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...