Question about 1987 Nissan Pickup

1 Answer

1983 nissan truck.1986 engine...4 wires from distributer and only 3 wires to truck,will not fire

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 173 Answers

There may well be a problem with the coil, but first, check to make sure the contacts aren't too fatigued.
If there is too much corrosion, there will be no contact, thus no spark.
Good luck with that.

Posted on Jul 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Diagram or picture of where the spark plug wires go into the distributer on a engine number 318-1


For this you have to determine when the #1 cylinder is at TDC (Top Dead Center) - when it would be firing. Take the distributor cap off and look at the rotor - it would be pointing at the #1 spark plug wire on the distributor. The wires would be connected it order around the distributor cap starting at 1. The sequence is 1-8-4-3-6-5-7-2 in a clockwise fashion.

Jul 13, 2014 | 1983 Dodge Pickup

1 Answer

1983 f150 351w distributor cap placement


I assume its a V8 and probably a 5.0L

5.0= 1-5-4-2-6-3-7-8 firing order

5.0 HO and 351 Windsor share 1-3-7-2-6-5-4-8 firing order

Cylinder numbering:

When looking into the engine bay the number one cylinder should be on your left hand side (left bank) at the front of the engine. The number eight cylinder is on the rear right (right bank) up against the firewall.

Firewall
4 8
3 7
2 6
1 5
Front bumper

distributer turns counter clockwize (#1 should be labelled on cap)

Apr 08, 2013 | 1983 Ford F150

2 Answers

Need firing and wiring digram for 86 nissan z24


For the 2.4L (Z24) SOHC:

Firing Order:
1-3-4-2

Cylinders
P__
u|.|.| Intake Side
l |.|.|....1....2.....3....4......|
l |.|.| Exhaust Side
e
y

Distributor:
.....1.....2
3................4
4................3
.....2.....1
Rotation:
Counterclockwise

Feb 27, 2010 | 1986 Nissan Pickup 4WD 1986

1 Answer

Need the firing order digram for a 1996 nissan pickup 2.4 ltr


1996 Nissan/Datsun Truck Pickup 2WD 2.4L SFI 4cyl
The Firing Order:

Firing order 1-3-4-2 --------- front | | of | 1 2 3 4 | distributor rotates counter vehicle | | clockwise ---------

Hope helped with this (remember rated this help) Good luck.

Nov 04, 2009 | 1986 Nissan Pickup 4WD 1986

2 Answers

Nissan 1984 2.4l 4cyl. 8sparkplug timing?


For the 1984 Nissan Pickup (listed under 1986) 2.4L

Firing Order:
1-3-4-2
Cylinders:
P.......Intake Side
u__
l |.|
l |.|.....1......2......3......4
e|.|
y......Exhaust Side

Distributor Connections:
......SIDES
Intake|Exhaust
....1...|...2
3.......|.......4
4.......|.......3
....2...|...1

Oct 31, 2009 | 1986 Nissan Pickup 4WD 1986

2 Answers

Its a 86 nissan 4x4 with a 2.4 with 8 wires I need the firing order .


For the firing order and wiring routing2_bing.gif for the 8 plug 4 cylinder engine: (Plugs on the intake manifold side are coded "I", and on the exhaust manifold side are coded "E")

Wire to 1I should be connected to tower on the distributor facing directly to the front of the vehicle. Going counterclockwise from there, the order is (1I), 2E, 3I, 1E, 4I, 3E, 2I, and 4E.

Oct 26, 2009 | 1986 Nissan Pickup 4WD 1986

1 Answer

Firing order for a 1986 gmc s15


FIRING ORDERS

To avoid confusion, ALWAYS replace spark plug wires one at a time.

The most important thing to remember about the removal and installation of a distributor, cap or spark plug cable is that all wires MUST be labelled before they are disconnected. Keep in mind that these figures depict a firing order where the distributor cap terminals are relative to EACH OTHER only and they do not necessarily depict the tower positions in relation to the rest of the engine. This is true because any distributor which has been removed and reinstalled may have been installed with the No. 1 spark plug tower at any position (360 degrees) in relation to the rest of the motor, as long as the rotor aligned to the No. 1 tower when the No. 1 cylinder was at TDC of the compression stroke (valves closed, ready for the plug to fire). As long as the remaining wires were connected in the correct firing order sequence (depending on direction of distributor rotation) the engine will run. DO NOT EVER remove more than one wire from the distributor cap at a time unless you tag ALL wires and towers to assure proper installation.

db45c9c.jpg

Fig. 1: 1.9L engine . Firing order: 1-3-4-2 . Distributor rotation: counterclockwise

cf6af5d.jpg

Fig. 2: 2.0L engine . Firing order: 1-3-4-2 . Distributor rotation: clockwise

5c33822.jpg

Fig. 3: 2.5L engine . Firing order: 1-3-4-2 . Distributor rotation: clockwise

cae855e.jpg

Fig. 4: 2.8L engine . Firing order: 1-2-3-4-5-6 . Distributor rotation: clockwise

9674e44.jpg

Fig. 5: 4.3L engine. Firing order: 1-6-5-4-3-2 . Distributor rotation: clockwise

I hope help you with this (remember rated this help) Good luck.

Oct 05, 2009 | 1986 GMC C1500

1 Answer

I need the firing order for a 1986 z24i engine and excactly where is the number 1i on the distribuor cap


1 - 2 -3 - 4 - 5 - 6 counter clockwise starting from the #1 plug it will be maked #1 and the #1 plug is passenger side front the firing order is also stamped on the intake manifold.

Jun 19, 2009 | 1986 Nissan Pickup 4WD 1986

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...