Question about 1988 Toyota Corolla 4 Door

1 Answer

Hi,i have a 17inch mag wheel that has a leak on the lip. i lost money because the person that tried to repair it just put glue that didnt stop leak for long..i think it needs to be alloy welded. but what material can i use to seal it before sending it again for repairs.i would like to do it myself. i cannot afford to lose any more money. Thanks. Dinesh Moses.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

Try some 'bead sealer'. I use this stuff religiously.

Posted on Jul 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to put in a brake booster and master cylinder on a 1989 ford motorhome


Really no different than on small cars unless you have Air brakes. Before doing this, test booster for leaks by spraying water mist on brake booster with engine running.

Engine will run differently or stall if booster draws in water mist. Try suction to remove brake fluid from Master as you will smell brake fluid that you spill or open brake line and let fluid out on both front and rear wheel. You may not need a different brake booster.

Money can be saved by repairing yourself, but what I suggest is bad brake work can cause an accident. Other repairs may not have that potential. At least watch a Video through an internet search, get a HELP CD from an Autoparts store or watch someone in person first.

You will need some quality FLARE wrenches to keep from rounding off the tubing fittings.

Apr 05, 2015 | 1989 Ford F 350

2 Answers

Ive had a power steering leak for a little while at first it was small and didnt loss much fluid, but now im lossing power steering fluid in just one day. How do I know if it is a hose that is leaking or...


You need to raise the car, put jack stands underneath for safety and spray some type of degreaser to clean off the oil on the hoses, pump, frame, etc., then wash off with a hose or pressure washer (best). Let everything dry and then have another person crank up the engine while you are underneath looking at pump and hose (be sure your jack stands are securely holding up the car before climbing underneath). If you're losing a lot of fluid each day you should easily be able to see your leak at the pump or hose connections. If it's gotten steadily worse, it probably is the pump seals getting worse.

Sep 07, 2011 | 1999 Mercury Cougar

2 Answers

WHAT'S THE EASIEST WAY TO FIND A BRAKE FLUID LEAK ON A 2001 FORD TAURUS. IT'S ONLY A SMALL LEAK, NEED TO TOP OFF FLUID ABOUT EVERY 4-6 WEEKS


Check around each wheel on the backside. If the line or fitting is leaking at the wheel, then you should see almost a wetness or oily look within that area. I would suspect a small leak in a brake line at one of the wheels, but you also have the tank, which could have a small crack. Even though you only add it a couple of weeks, there should still be a sign of leaking. Just a reminder, If the fluid gets on the rotors and the brakes are applied often, you run a risk of the wheel setting fire. Good Luck

May 31, 2011 | 2001 Ford Taurus

1 Answer

I have a radiator leak and I need it fixed ASAP but i can't afford a new radiator yet should I use radiator stop leak? I've heard bad things about it and one person even told me it caused her engine to...


I never recommend anyone pour any stop leak in the radiator of any car. But saying that if you are going to replace the radiator and do not have the money to do so now, then go ahead and use Bar's Stop Leak as an emergency repair. Just make sure to flush the system fully, and replace the thermostat when you do replace the radiator.

Oct 09, 2010 | Chevrolet Monte Carlo Cars & Trucks

1 Answer

Oilpan replacement


I will try to save you money. If the pan is leaking around the gasket you many be able to tighten it enough to reseal it. There are some products that can seal spot leaks like "Seal-All". It is like a model airplane glue that resists gas and oil.

For rusted pans you can use "JB Weld" This hardens and strengthens what you put it on. You mix it like bondo and it dries quickly. Your pan does not have much pressure in it except from blowby from the pistons.

Unfortunately I have not had to replace a pan on this series of car. Sometimes you need to lift an engine off its mounts and turn the crank to clear the lobes, the oil sump may clear. A quick look at a Chiltons will confirm this repair. Wanted to give you alternatives to pulling the pan so I answered your repair problem. Good Luck on this.

May 05, 2010 | 1996 Mercury Grand Marquis

1 Answer

How to put the 17inch rim to nissan b13, since the back wheels will touch the shocks?


you can buy spacers from almost any car accessory shop if you need a big spacer you might need to get extra long wheel bolts

Feb 17, 2010 | 1996 Nissan Sentra

1 Answer

Is it ok to replace a 16 inch mag rims with a 17inch on a E46 BWM 318i. your response will be highly appreciated


If your wheel size increases and your tire size is reduced enough to allow free turning movement of the wheels when cornering YES

Aug 20, 2009 | BMW 318 Cars & Trucks

1 Answer

Mag wheels


No the tire can not be stretch to fit you have to buy the set of tires now to install on ur wheels

Jun 01, 2009 | 1998 Nissan Maxima

1 Answer

How to take the dashboard plastic piece off?


Please click here for instructions how to remove the dash board from
the car...


Good luck...

Jan 16, 2009 | 1993 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...