Question about 1994 Toyota Celica

1 Answer

Celica speedo coverter

Hi. I have the same problem as Dave before. i have just got a speedo coverter chip for my car it says to use the gearbox speed sensor a 3 pin connector at the rear of the engine with blue white/black and blue/yellow i cant find this plug. I know it's somewhere side of the transmission but i can't see it from the top. do i have to get underneath my car?? can anyone please send some pics where is that sensor loceted?

/Toyota Celica ST202 '96 3S-GE *** import

thanks
Conrad

Posted by on

  • twin_k84 Jul 23, 2009

    thanks mate

  • twin_k84 Jul 28, 2009

    I?ve found the sensor with a little help of my mechanic. It?s well hidden on the back of the gearbox. Impossible to find without knowing where to look (you have to trace it by the cable?) The converter works perfect

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

It is on top of the gearbox about half way from where the gearbox joins the motor and the other end of the gearbox, i have tried to upload some pics but no luck,

Posted on Jul 31, 2009

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
mecanica03
  • 902 Answers

SOURCE: what kind of labmda sensor

your car have 2 lambda sensor , one before catalyc converter and one after

Posted on Jul 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Nissan Serena 2003 model with CVT gearbox. It wount engage 1,2 when moving in low speed, or uphill.when behaving this way, its fails to reverse,or reverse in difficulty.


Have the codes read at Autozone. Check out the wiring to the speed sensor on the output shaft of the gearbox. Be prepared to change the speed sensor itself. Is the speedo functioning? Often when the speed sensor is faulty the speedo dial fails

Aug 23, 2016 | Nissan Cars & Trucks

1 Answer

Celica 5 speed 2001 with only 59,000 miles top speed is 78 mph and it seems engine is at the max RPM's any idea on what's going on?


Hi Mr. Rauscher.
As I understand if correct,and your vehicle is Manual Gearbox,most probably you might have slipping Clutch,if it is Automatic Gearbox again you might having slipping hydraulic clutches. Ask for a test drive from your mechanic

Apr 03, 2014 | Cars & Trucks

1 Answer

Hi my speedo and mileometer are not working on my2001 Peugeot 206. Any ideas??


Transducer fault also known as gearbox / speed sensor - location on top of gearbox about £20 from dealer

Dec 08, 2010 | Peugeot 405 Cars & Trucks

1 Answer

I have a 1996 Toyota Ipsum, the speedometer and rev counter sometimes run wild and it disenganges gears. What can I do to fix the problem of the speed sensor?


Sounds very much like a problem I have experienced on and off for a couple of years. If your rev and speedo gauges drop dead, your o/d light flashes and your auto gearbox doesn't like to change through the gears, then the odometer pcb has a failed chip. You can pull it apart and try to resolder the loose chip back on. But be warned this is very delicate job (more suited for repair shop) you could end up flooding other chips with solder (as i did). It can be changed out with one from the wreckers but will have to be re-set to your ks/milage. One solution at this stage, if re-soldering is your option, you can also swap your eeprom chip from your old odometer pcb to your new/used pcb from the wreckers. This eeprom carries all the historical ks/milage used. See some info on tachosoft.com (eeprom info) and info from toyota forums on speedo/rev gauges (pcb failure) In a nut shell, this pcb odometer problem kills the feed back signal back to the o/d and gearbox speed sensors etc and so the gearbox doesn't know when to change through the gears.

Oct 15, 2010 | Toyota Passenger Cars & Trucks

2 Answers

Hi , i want to know where in the transmission is the speed sensor located?


hi the speed sensor will be located above the drive shaft on the driver side on a right hand drive , it goes into the differential on the gearbox .

Sep 06, 2010 | 2000 Ford Windstar

1 Answer

How do you change the gearbox oil on a Mazda 121 1994


drain the gear box then undo the speedo bit what is your oil level bit the oil should covert the gear in the box as you will see it with a torch.

Aug 08, 2009 | 1994 Mazda 323

1 Answer

Peugeot 406 1996 (p reg) speedo working intermitantly


Most likely to be the Bitron speedo interface behind the glove box, I replaced all the diodes, capacitors and both chips on mine (electronic expert), though you could have dry joints on the back of the dash or the road speed sensor on the back of the gearbox.

Apr 04, 2009 | Peugeot 405 Cars & Trucks

1 Answer

Speedo sometimes failed to work


I had this exact problem on my old focus. Its nothing to worry about and its not expensive. Your car has a speed senser underneath the gearbox and a common fault on these cars is for the gearbox to slightly drip oil. When the oil drips it drips right on top of the senser and blocks the speed readings.
The good thing about this is your milage on your car wont go up when the speedo stops working, so when you come to sell it!!!!!!! you get my point.
to fix this problem it cost about £20 if you do it yourself.

Feb 18, 2009 | 2000 Ford Focus

1 Answer

Speedometer not working on 2000 toyota celica


if i were you disconnect speedo cable both ends sit some one in car to see if cable is internally turning? if so good! now take small hex key spin speedo cluster to see if it moves speedometer arm if so put it back together and replace speed sensor usually located at speedo cable input at transmission have a great day!John

Jan 11, 2009 | 2000 Toyota Celica

1 Answer

Speedo coverter


actually the conector you are looking for is on the side of the transmission aand is called speed sensor you have me little cofuse with the speedo, any way next time you ask for something make sure to include the engine size since this car come with 2 diferent negines and also one is hatch back and the other budy stile not. also alwys say if it is manual or automatic transmission that way will be easer ti help you.
i had to keep looking at manuals for both engines and budy stile

Jun 03, 2008 | 1994 Toyota Celica

Not finding what you are looking for?
1994 Toyota Celica Logo

Related Topics:

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...