Question about 1998 Honda Civic

2 Answers

Need torque settings for honda ballade cylinder head bolts

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 382 Answers

Dear friend-your torque setting is cold 66 nm

Posted on Jul 23, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

85 foot pounds and they are tork to yeald boltsso they have to be replaced do not use old bolts or you will brake them, so tork then to 85 PSI then 1/4 turn past tork.

Posted on Jul 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the torque settings on honda ballade 150 luxline 1994 herd cylinder bolt


engine code- D15Z1
stage1- 30NM
stage2-73NM

engine code-D15B2
stage1-30NM
stage2-65NM

Sep 08, 2016 | Honda Cars & Trucks

1 Answer

What is the torque for the cylinder head bolts on the 2004 Honda civic hybrid. I've looked all over the Internet and I can't find it


you will not find torque settings for the cylinder head bolts. the setting to get the correct tension will start at 30ft/lb and then becomes an angle of turn of the head stud. So what you will be looking for will be something like start at 30ft/lb the turn 90 degrees then another 90 degrees and then 30 degrees .( these are not the figures just an example of what you will be reading as a head tension setting) you will need and angle gauge ( around $30.00 from a good auto parts store ) to do the job

Dec 14, 2014 | 2004 Honda Civic

1 Answer

Hi i need torque settings for a honda ballade 1983 model 1.5 12valve ew2 motor


Main bearing stage 1: 25NM, stage 2: 50NM
Big-end bearing stage 1: 14NM, stage 2: 28NM
Cylinder head stage 1: 30NM, stage 2: 60NM

Sep 27, 2014 | Honda Accord Cars & Trucks

1 Answer

2003 honda odyssey 3.5 head bolt torque spec


Apply new engine oil to the threads and flanges of the cylinder head bolts.

Tighten the cylinder head bolts sequentially in three steps.

NOTE: Perform each step twice.

1st step torque: 39 Nm (4.0 kgf-m, 29 ft. lbs.)
2nd step torque: 69 Nm (7.0 kgf-m, 51 ft. lbs.)
3rd step torque: 98.1 Nm (10.0 kgf-m, 72.3 ft. lbs.)

Feb 28, 2014 | 2000 Honda Odyssey

1 Answer

HEAD TORQUE AND SPECS FOR A 2001 HONDA ACCORD 2.3L


Tighten the cylinder head bolts. Tighten the cylinder head bolts is sequence to 29 Nm (3.0 kgf-m, 22 ft. lbs.). Use a beam-type torque wrench. When using a preset type torque wrench, be sure to tighten slowly and do not overtighten. If a bolt makes any noise while you are torquing it, loosen the bolt and retighten it. Make sure the threads are clean, new heads bolts are best.

10_29_2012_10_15_36_pm.gif

Oct 29, 2012 | 2001 Honda Accord

1 Answer

I need the head bolt torque sequence for a 1996 honda accord 2.2? I also need to know the pounds of pressure and how many passes needed to torque. Thanks


Install the cylinder, then tighten the cylinder head bolts sequentially in 3 steps. step 1. 29 ft. lbs. step 2. 51 ft. lbs. step 3. 72 ft. lbs.

Sep 06, 2012 | 1996 Honda Accord

1 Answer

99 Honda civic 1.6 engine torque specs and sequences for cylinder head


Tighten the cylinder head bolts to their final torque specification in two steps. Use a crisscross sequence starting with the bolts at the middle of the head and working toward the outer bolts.
  1. Step 1: Tighten each bolt to 22 ft. lbs. (30 Nm).
  2. Step 2: Tighten each bolt to 61 ft. lbs. (85 Nm).

zjlimited_1681.jpg

Fig. Cylinder head bolt loosening sequence - 1.6L (B16A2) engines (click image for zoom)

Hope helps.

Aug 05, 2011 | 1999 Honda Civic

1 Answer

Need torque settings for cylinder head bolts on a 52 reg skoda fabia 1.4 16v any help much appreciated thanks


Torque settings for cylinder head bolts for Skoda Fabia 1.4 16v

Cylinder head bolts tightening order:

tdisline_116.jpg

IMPORTANT NOTE: RENEW BOLTS!

Stage 1: Tightening torque = 30 Nm
Stage 1: Tightening torque = 90 Degrees
Stage 1: Tightening torque = 90 Degrees

Please do rate my response. Thanks!

Dec 17, 2010 | Volkswagen Polo Cars & Trucks

2 Answers

Torque setting cylinder head bolt 4 cylinder KIA sportage


I need the torque settings and pattern for a Kia Sportage 2.2

Nov 24, 2009 | 2001 Kia Sportage

Not finding what you are looking for?
1998 Honda Civic Logo

696 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...