Miele washing machine, W4840, Fault,Close door and confirm wioth start

SOURCE: Miele Dishwasher door release problem

I switched the dishwasher off at the mains and then back on again. At this point the plastic arm started making a noise like it was trying to retract so I pulled the door to help it along. The door opened and the arm fully retracted - much to my relief.

SOURCE: Miele

Clean the drain by opening the door on the bottum left.
Use the yellow plastic thingy in the front of the soap drawer to do it.

You can open the machine door by pulling the yellow tag in the bottom door.
Drain the water through the filter, clean the filter and close.

Then unplug the machine and tilt it forward by about 1 foot until you see water coming out of the bottom (put towel on floor).

Plug back in and voila!

I do think that this machine is a major pain. No spin cycle and this kind of stuff to go through. Anyone want to buy mine?

SOURCE: Miele W4840 is LOCKED

hi try pressing in the heavy soil button to take off the child lock, good luck

Barry Coates

• 3463 Answers
• Posted on Jan 27, 2010

SOURCE: hotpoint ultima washing machine showing fault code

Error code F05 indicates pressure switch jammed on full.
Remove lower rear panel of washer.
Remove large black hose on bottom of drum.
Remove and clean filter inside hose.
Remove hose onto pump, and check for blockage or obstruction here as well.

Make sure there is no water in drum before you start.
Please rate my solution.
Thankyou.

SOURCE: Front loader AWM 6100 - door open light flashes and won't wash

I think it may have try and get your local engineer out to have a quick look tell your thinking of buying new and what price can he supply 4. and you like a free estimate .