Question about 1994 Chevrolet Camaro

2 Answers

1994 Camaro multifunction lever wil not change

1994 Camaro multifunction lever will not change lights from lowbeam to highbeam. I replaced the dimmer switch but that was not the problem. The multifunction/ turn signal lever is not pulling the rod (connected to the dimmer switch) hard enough to change the lights. However, the turn signals and wipers work. Please help.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Clean your fuse box the on in side the car gets dust in it ....

Posted on Mar 24, 2013

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Try spraying some CRC into this switch make fix the problem

Posted on Jul 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 97 nissan altima and my lowbeams dont work but my highbeams do and i already replaced headlights today?? what can i do


Could be your dimmer switch gone bad, that controls your low and high beams, the contacts for the low beam is usually the one that goes bad first, the high beam contact isn't used much.
My Oldsmobile had the same problem, only high beams worked, replace the dimmer switch and fixed the problem. Unfortunately with my car replacing the dimmer switch gave me a hard time. Most dimmer switches are located in the steering column underneath the dash board and a little hard to get at. Dimmer switch costs about 12 to 15 dollars, very cheap but very hard to reach and replace. The switch it self is activated with a small metal rod going up and down next to the steering column and into your turn signal lever, when you pull up it pushes the metal rod down to activate your high or low beam lights.

Mar 04, 2015 | Nissan Cars & Trucks

2 Answers

Highbeams work, low beams do not. wipers only work when highbeams are on. highbeams work but only when you HOLD the turn signal lever towards the steering wheel. all other lights work. relay switch or...


The problem is most likely your cars multi function switch. That is the switch that controls your blinkers, dimmer, and everything else. If you change the switch that should solve your problem.

Sep 11, 2011 | 1990 Volkswagen Cabriolet

1 Answer

1998 Volvo lowbeams will not come on. Tried replacing the headlight fuse, light control relay, and the turn signal/highbeam arm....still nothing. Am I missing something somewhere? The parking lights and...


If your high beams come on only when you hold the lever, and you have no headlights otherwise, i would suggest it has to be the dimmer switch that is faulty. First, though, use a test light to see if you have power to the low beams. Just pull the bulb out, and test in the socket. If you have power there, the problem is just the bulbs. No... they didn't both burn out at once, but you don't notice until they are both gone. You meet cars all the time with one headlight. When the second one goes, they over think the problem.
The fact that your dimmer switch has to be held to get any headlights would lead me to believe it's the dimmer switch that is faulty.

Oct 29, 2009 | Volvo S70 Cars & Trucks

1 Answer

Highbeam Headlights not working


try replacing the fuse because low beam and high beam are two different systems

Aug 07, 2008 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
1994 Chevrolet Camaro Logo

385 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8274 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...