To remove thermostat from the engine for a Mazda lantis 1994

SOURCE: HOLD LIGHT FLASHING ON DASH PANEL

There's most likely an issue with your transmission. Bring it to a shop to have it scanned for any codes

SOURCE: engine oil capacity and manual trans oil capacity

should be on vehicle some where or call manufacturer

Colin Stickland

• 22516 Answers
• Posted on Jan 03, 2010

SOURCE: i wanna wiring diagram

buy a haynes workshop manual ,not enough upload capacity on this site to put anything like this on here

SOURCE: need the firing order for 1993 mazda lantis 2litre v6

Hi Heiko:
I Googled your question. Here is the link that contains the results.
Hoefully you will find your answer.
https://www.google.ca/#q=firing+order+in+a+1993+mazda+lantis+2+litre+v6+engine
Cheers

Steve Luck

• 819 Answers
• Posted on May 05, 2016

SOURCE: mazda lantis 1994.how can I get the brake piston pushed back. I used a G clamp and undid the bleeding nipple but it wont move.

Some pistons do not push back in, they wind back in. You can buy or hire the tool (here in the UK you can) but it can be cheaper to get a local garage to do it. Some wind the same way to retract, but others are handed and the left side goes one way and the right side the opposite.
I am not saying yours does this, but it might be worth investigating. Has the piston got what looks like something that a winding tool will fit to, or is it completely flat faced?
HTH