Cars & Trucks Logo

Related Topics:

m
melvin payne Posted on Feb 24, 2017

I need to know what the fuel pressure setting is for a 2000 gmc k3500 with a 7.4 big block

5 Related Answers

Anonymous

  • 61 Answers
  • Posted on Jan 28, 2009

SOURCE: 2000 gmc safari

It is part of the fuel injector inside of the intake manifold. You have to replace the Injector Assembly which is called the "Fuel Meter Body Assembly"

Ad
66 chrgr

mike loshbough

  • 1011 Answers
  • Posted on Mar 22, 2009

SOURCE: 2000 gmc jimmy wont start fuel pump comes on and cuts off...

the fuel pressure if leaking could cause this the regulator is located under the intake plenum but you should smell gas .if you dont then most likely the pump is bad ,the pump will come on for 2 seconds when the key is on then go off it will not stay on with just the key on only when you crank it will it .so have your fuel pressure checked with a gauge.

Anonymous

  • 95 Answers
  • Posted on Mar 23, 2009

SOURCE: Where is fuel pressure regulator located on 2000 GMC 3500 HD truc

Theres no "fuel regulator". Try checking the fuel filter. Good luck

Anonymous

  • 184 Answers
  • Posted on Mar 30, 2010

SOURCE: need to replace fuel pump on 2000 Gmc savana how

If the pump is in the gas tank,which most new vehicles are, you'll have
to drop the gas tank, to remove the pump and sender. Make sure you
do this with as little fuel in it as possible,seeing that fuel is like 8-10 lbs.
per gallon. Good luck.

ercupa190

ernesto cuadra

  • 12223 Answers
  • Posted on Oct 05, 2012

SOURCE: fuel pump pressure specs for 2001 gmc jimmy

see the indication for manufacturer specification which is the pressure.
of fuel pumps.
God bless you

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Fuel rail does not hold static fuel pressure no start 2000 gmc sonoma

It could be a leaking fuel injector or a bad fuel pressure regulator. Do this plug the fuel return line then turn the switch on then off, if the pressure holds replace the fuel pressure regulator. If the pressure bleeds down remove the fuel rail with the injectors still attached and see which ones leak. I hope this helps. Take care.
0helpful
1answer

What should the fuel pressure be on a 2000 gmc jimmy 4+4 4 door v 6

This system should be at 60-66 psi NO MORE NO LESS.If the pressure is low it can be the fuel pump but can also be the fuel pressure regulator valve so make sure you check the FPR
0helpful
2answers

I would like to know the fuel pressure for a2000 gmc jimmy 4.3

45to60 psi hope that help if you need help call 9106545823
2helpful
2answers

How do I check the fuel pressure? Where on the fuel line do I check it and what parts do I need?

Unfortunately from 1992 -1996 they didn't put a fuel pressure test port or schrader valve into the fuel system. You will need to install a pressure gage and hoses in-line just after the filter to measure actual fuel pressure. Pressure was pretty low back then 9-13p.s.i. on 6 & 8 cylinders, 26-32 p.s.i. on big block.
1helpful
3answers

Need to replace fuel pump on 2000 Gmc savana how

If the pump is in the gas tank,which most new vehicles are, you'll have
to drop the gas tank, to remove the pump and sender. Make sure you
do this with as little fuel in it as possible,seeing that fuel is like 8-10 lbs.
per gallon. Good luck.
2helpful
1answer

I need to know how to install a fuel pressure regulator on a 98 GMC K3500 4x4

The fuel pressure regulator is located under the upper intake manifold or plenum. This large aluminum casting must be removed for access.I assume this is a 454 c.i.d.old body style pick up. 2000 was a split year for GM. Both old and new body styles.
0helpful
1answer

2000 gmc sonoma with a 4 cylinder....the motor will turn over but it doesnt seem to be getting fire...i dont think its a head gasket...no water mixed with the oil...answers?...suggestions?

You need to make sure you have fuel, spark and compression.
Remove one of the plug wires, stick a screwdriver (or other suitable item into the end of the wire. Then hold the exposed metal of the screwdriver about 1/2 and inch from some metal (engine block, intake manifold, etc). Be sure to keep clear of the fan/belts and wear gloves (as you could be shocked). Have a helper crank the engine and watch to see a spark between the screwdriver and the metal on the engine.
Check the fuel pressure to make sure you are getting fuel.
Check the compression with a gauge.

By completing these test you will know which route you need to look into.
0helpful
1answer

Had to have fuel pump replaced on my 2000 Safari Van

You need to find the psi ratings for the pump you have and see if it matches the pressure specs for a 2000 GMC Safari pump.The parts store you purchased it from( or any parts store) should be able to look up that info on his merchandise
1helpful
1answer

2000 gmc safari

It is part of the fuel injector inside of the intake manifold. You have to replace the Injector Assembly which is called the "Fuel Meter Body Assembly"
Not finding what you are looking for?

35 views

Ask a Question

Usually answered in minutes!

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...