Question about 2004 Ford F150

1 Answer

Hibeams dont work on my 2004 ford f-150

The high beams don't work. i have replaced the multi switch and checked the fuses. low beams work and the driving lights work. could someone please help.

Posted by on

  • thickie733 Jul 23, 2009

    I have checked the bulbs and still the same problem.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 43 Answers

I don't remember right off hand if the bulbs are double filament or not. If there is only one light in the housing than they are double filament bulbs and just replace them.

Posted on Jul 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 mazda 6 low beams don't work but high beams do


its probably the switch inside on the steering column check fuses first

Mar 20, 2013 | Cars & Trucks

1 Answer

2005 monte carlo drl won't tun on and i have no Low beams too. High beams, turning signals and hazards works. I replaced the bulbs, still drl and low bemas don't work. Checked all fuses and th


CHECK UNDER HOOD FUSE BLOCK FOR FUSES AND CIRCUIT BREAKER AND RELAYS....IF NOT IT IS AN ELECTRICAL DIAGNOSES. USE A MULTI METER TO SEE IF YOU ARE GETTING CLOSE TO 12 VOLTS AT SOURCE!
***NO EASY FIX...ALMOST EVER!!!

Jul 30, 2012 | 2004 Chevrolet TrailBlazer

2 Answers

What fuse is high beams 2005 ford f150


Here is a step-by-step to replace the relay.
http://www.ehow.com/how_4509213_replace-hibeam-headlamps-relay-ford.html

Dec 08, 2011 | 2005 Ford F-150

1 Answer

My high beams do not work. Low beams work fine. When i switch to high beam low beam goes out to. 2004 f-150


Check the high beam relay in the central Junction Box (Fuse box) under dash and check fuse F2.35, 20 amp yellow. One is bad.

See owner manual for fuse panel location & Chart.

please rate.

Aug 03, 2011 | Ford F-150 Cars & Trucks

1 Answer

I have no headlights on my 2004 f 150. Fuses are good but i do not have low or high beams. Bulbs appear to be good. I have running lights and fog lights


Based on what you have described it sounds like a bad headlight switch. Since the low and high beams generally use different fuses that can be ruled out. (although checking to be sure is a good idea) Usually both high and low beams go through the headlight switch that's where I would look first.

Oct 04, 2010 | 2004 Ford F150

1 Answer

Low beam light does not work but high beam does. not bulb or multi switch or cramped wire any idea?


Check the fuse box . Some vehicles have a fuse for the high beam and the low beam. Usually a 10 amp spade type fuse. Some vehicles use a separate fuse for right and left sides.

Jan 17, 2010 | 1996 Ford Explorer

1 Answer

1994 ford f-150 with day time running lights headlightnot working


Daytime Running Lamps
The daytime running lamp (DRL) system is designed to turn the high beam headlamps on, with a reduced light output, and without illuminating the high beam indicator lamp in the instrument panel. You have a DRL Module.
The multifunction switch is the stalk on your column.

This is 96 F150 circuit. Don't have 94.

51f651c.gif
Symptom Chart, Headlamps HEADLAMPS Condition Possible Source Action
  • Headlamps Inoperative
  • Circuitry open/shorted.
  • Damaged headlamp switch.
  • Blown fuse.
  • GO to Pinpoint Test A .
  • Headlamps On Continuously
  • Circuitry open/shorted.
  • Damaged headlamp switch.
  • GO to Pinpoint Test B .
  • High Beams or Low Beams Inoperative
  • Circuitry open/shorted.
  • Damaged multi-function switch.
  • GO to Pinpoint Test C .
  • One High Beam or One Low Beam Headlamp Inoperative
  • Circuitry open/shorted.
  • Damaged connector.
  • Headlamp bulb damaged.
  • GO to Pinpoint Test D .
  • Flash-to-Pass Inoperative
  • Blown fuse.
  • Circuitry open/shorted.
  • Damaged multi-function switch.
  • GO to Pinpoint Test E .



73d6d64.gif

Feb 25, 2009 | 1994 Ford F150 Styleside Supercab

1 Answer

2006 ford freestar high beams


there should be seperate fuses for the high beams in the under hood fuse box try checking them

Nov 05, 2008 | 2006 Ford Freestar

Not finding what you are looking for?
2004 Ford F150 Logo

338 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...