- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the manual has like 100 schematics, nobody will post them all,
why not just ask 2 things , why does it fail and what are the causes?
or OMG what tests find it, like shop does.?
won't start means what
does not crank
or cranks fast and but will not start the engine and run.
check fuses first
scan the PCM to see why, like shops do or even you.
91 is very old car, now.
car ran for 30 years, and just failed now? no story here.
found it for free or in a barn dead , tell the story there is one.
if the starter is bad dead silent , there are like 4 major caused
but engine dead I have over 20 tests to find it.
not told what the starter motor does key on crank/start position.
does car have an alarm on it. failing
does car have those silly remote start kits put on it.
full stop, no real clues told so I stop'
most likely you don't have a dipstick, like mine, SLK 2.3, I asked the garage to dip it with their special multi dipstick, f o c, nice garage, the only other thing I would suggest is get the transmission fluid changed by a garage, silly not having a dipstick if you ask me
This is an electrified display village like one uses at Christmas or for a toy train set- not something we normally see in Automotive. Try this web site: http://www.ehobbytools.com/contents/en-us/d17.html
and good luck
drop transmission drop oil pan you ma have to un bolt the motor
mount bolt jack the motor pull the pan rear cup is where the seal
is the new seal comes in rope or rubber seal look to see the
direction the seal is going and don't or get to tork the bolts
First check that the blender door motor is operating.This should be a little box directly in front center of the console. When you adjust the temp control, the arm should move on the box motor. Probably though your heater core is plugged.Do a search for don-ohio and heater core and maybe the long tryped message will come up, if you CAN do a search on this site.I'm pretty new here, and don't know the `ropes'. ha! don-ohio
Hello, I hear that pt quit while driving and you heard a thump,and you replaced the battery and coil and still no fire. Well it sounds like you have timing belt that broke it will keep it from firing at the coil if broke. Remove oil fill have someone spin engine over and see if camshaft turns if not turning the belt is broken. Please rate this answer, Thank you.
×