Question about 2002 Dodge Intrepid

2 Answers

Tie rod need to now if i have to pull front steering rack to fix upper tie rod bushing in 2002 dodge intrepid

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,392 Answers

No. Go to Napa, get the bushing repair kit. Turn the steering wheel all the way to the right. Remove the air inlet tube. Should be 2 7/8" bolts retaining the inner tie rod ends. Loosen both. Remove one at a time, replace bushing with kit. Use some synthetic brake grease on the bushings. I recommend Napa sylglide. Replace the bolt, but do not tighten all the way. Do the other the same way. Tightnen both bolts, reinstall the air inlet tube, get vehicle aligned.

Posted on Jul 22, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 141 Answers

No,but it a tight fit ....pull off air box from back of intake,they big bolt has a foldover tab to lock it in.Remove outr tie rod and pull it out ti press in new bushing....some of the replacements are two piece....hope this helps...Lee

Posted on Jul 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Car shekes when hit bumps


Check for bad wheel balance, struts, lower ball joints ( no upper joints) , outer tie rod ends, inner tie rod ends, stabilizer bar bushings, lower control arm bushings , and finally a wheel alignment ,you have some bad looseness in one or more of these front end parts. GOOD LUCK FRIEND.

Mar 15, 2015 | 2001 Dodge Intrepid

1 Answer

2002 dodge dakota sxt 2wd got new tires new brakes, calipers, disc, and new upper and lower ball joints but still when i turn a certain degree and apply my brakes a popping noise in the front end occurs...


did you check the upper and lower control arm bushings for excessive wear or movement. also check the inner tie rods on the rack and pinion assembly.

Aug 15, 2011 | Dodge Dakota Cars & Trucks

1 Answer

Whats up with the steering in my 96 intrepid?


What are the symptoms?
If the steering pulls to one side, then you probably need an alignment.
If there is a vibration through the steering wheel, it is probably a loose tie rod end.
If you feel a thunk on bumps or hitting the brakes, it is probably a ball joint or track arm bushing.

Dec 20, 2010 | 1996 Dodge Intrepid

1 Answer

Slack in steering wheel


These may have problems with the Inner Tie Rod Bushings. The inner tie rods are up on the firewall behind the engine, have someone turn the steering wheel back and forth (just enough to feel all the play) and see if the rods are loose.

Sep 02, 2010 | 2002 Dodge Intrepid

2 Answers

Power steering "pop"


On these vehicles, rack & pinion mount bushings and inner tie rod bushings basically wear away to a point sometimes they fall apart completely, dangerous to drive if thats the case. Easy fix for a trained technician.

Feb 24, 2010 | 1994 Chrysler LHS

1 Answer

Rack pinions and bushing installement


pretty decent job ahead first jack up car support with jack stands remove front wheels remove nuts on tie rod ends remove tie rod ends from spindles with tie rod end tool or tap with malet were they sit to loosen them hit the spindle area not the tie rod or tie rod threads then dissconnect power steering lines from steering rack also disconect steering linkage to rack there should be 2 main bolts holding assembly to frame remove them should free rack i know that car may have a unique design were u may have to remove inner tie rod ends first if it has those round bushings that always go bad disconect inner tie rod ends behind engine on top of steering rack then remove rack from wheel well replace those inner tie rod bushings u may be able to leave outer tie rod end connected to spindles and u may be able to get to the sterring rack from behind engine good luck

Mar 28, 2009 | 1997 Chrysler Concorde

1 Answer

Tie Rods, Bushings, Brakes and Rotors


why ???? somebody. see you like a rich person. ask you self the steering wheel shakes when you brake. have somebody to helpyou jack the car from the front put the parking brake on move the front wheel side to side(dont losing the nuts from the tire) and up and down you fell some play on both tires maybe you need tie rods

Feb 26, 2009 | 2002 Dodge Neon

2 Answers

1997 dodge Intrepid: inner tie rod


To Steering Gear Bolt 90 Nm (66 ft. lbs.) Jam Nut 75 Nm (55 ft. lbs.)
NUMBER: 19-001-01
GROUP: Steering
DATE: Mar. 23, 2001
THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 19-003-00 REV A, DATED OCTOBER 6, 2000 WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDE PART NUMBER CHANGES AND ADDITIONAL MODEL YEAR.
WARNING: FAILURE TO ACHIEVE A MINIMUM TORQUE OF 100 NM (74 FT. LBS.) MAY RESULT IN THE ATTACHING BOLTS LOOSENING AND FRACTURING. THIS COULD RESULT IN A SUBSEQUENT LOSS OF STEERING CONTROL. BENDING THE RETAINING TABS ALONE WILL NOT PREVENT THIS.

SUBJECT:
Loose Steering

OVERVIEW:
This bulletin provides service procedures and parts information for the inner tie rod bushings.
MODELS:
1993 - **2001 ** (LH) Concorde/Intrepid/LHS/New Yorker/Vision/300M
SYMPTOM/CONDITION:
Loose feel or clunk in the steering wheel as the wheel is moved from side to side.
DIAGNOSIS:
Observe the inner tie rod to steering gear attaching point while moving the steering wheel from side to side. If there is movement between the gear and inner tie rod, perform the Repair Procedure. If no movement is evident further diagnosis of the condition will be required.
DISCUSSION:
The inner tie rod bushings have previously been serviced with the tie rod assembly. This bulletin releases the parts, service procedures, and special tool necessary to service just the bushings. Subsequent service manuals will contain the Repair Procedure.

Jan 13, 2009 | 1994 Dodge Intrepid

1 Answer

Tie rods


I did this on a 2002 Intrepid, and found that it wasn't too complicated. I replaced the bushings only, rather than the tie rod end. You can get bushing replacement kits where the bushing is in two pieces and doesn't have to be pressed in. Before starting, turn the steering all the way to the right, then remove the intake air ducting. The rack and pinion assembly should be easily accessible now. BE SURE AND REPLACE ONLY ONE TIE ROD BUSHING AT A TIME. If you take both bolts out at the same time, you may have a very hard time getting all the sleeves, etc. aligned in the steering unit so you can get the bolt back in the proper hole.

Jul 03, 2008 | 2000 Dodge Intrepid

Not finding what you are looking for?
2002 Dodge Intrepid Logo

406 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...