Question about 1998 Dodge Ram 1500 4WD

1 Answer

Its a 2005 dodge ram truck how do i find out if i have 2 or 4 wheel abs we need to replace the wheel bearing we don't know how to find out if we have 2 or 4 wheel abs we just got the jtruck and did not have a maunal in it

Posted by on

  • Richard Scordino May 11, 2010

    If you have abs there will be an abs sensor and wire going to the sensor at that wheel.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 721 Answers

Most have only rear abs. You can remove a front wheel & on the inside of the half shaft,just behind the rotor you'll see a sensor & the outer part of the cv joint will be ribbed. You can also call the dealer or auto parts store with the VIN number & that will tell you as well.

Posted on Jul 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need Help. My 2005 Dodge Ram has the abs and brake light on, and the speedo is not working. I have changed the speed control sensor on the rear diff and the transmisson 2 times, though maybe I got a bad...


The ABS and BRAKE warning lights are on in the cluster because there is an active fault in the ABS module. The speed sensors that you have replaced are not direct inputs to the instrument cluster. Your truck should have one or possibly two front wheel speed sensors and one speed sensor in the rear diff. These are all direct inputs to the ABS module which are then calculated and sent out on the "bus" communication wire which is read by the cluster. It would be much easier to diagnose this problem by knowing what the active codes are in the ABS module.

Jan 23, 2011 | Dodge Ram Cars & Trucks

1 Answer

Abs and brake light stay on


check again the connections and that it is clipped on to supports correctly -also check the wires may have damaged or frayed one of the lines

Mar 04, 2010 | 1998 Dodge Ram 1500 4WD

1 Answer

How to determine if 97 Ram 1500 has 2- or 4- 2wheel brakes? Need info for wheel bearing replacement.


on 1997 dodge ram 1500s you can look at the back of the front brakes and if you do have 4wheel abs you will have a brake line and an electrical line running tto the brake caliper. you can also look at the master cylinder, on the right side of the power brake booster (if youre looking from the front of the truck) there will be a metal brake distribution block if it has 2 lines running out of it you have 2 wheel abs...4 lines means 4 wheel abs

Oct 23, 2009 | 1997 Dodge Ram 1500 Club Cab

1 Answer

I need a diagram on front hub and brake assembly for 1999 dodge 1 ton dually 2 wheel drive. the front brake rotor is warped i need to replace it


8–Stud Rotor
  1. Raise and support the vehicle.
  2. Remove the wheel.
  3. Remove the hub extension.
  4. Remove the brake caliper assembly.
  5. Remove the axle nut cotter pin. Remove the axle nut.
  6. Disconnect the ABS wheel speed sensor wire from under the hood. Remove the sensor wire from the frame and steering knuckle, if equipped.
  7. Back off the hub/bearing mounting bolts 1/4 inch each. Then tap the bolts with a hammer to loosen the hub/bearing mounting bolts.
  8. Remove the bolts and remove the hub/bearing assembly.

Sep 16, 2009 | 2000 Dodge Ram 3500

2 Answers

Wheel bearing hub assambly + abs ???


THE WHEEL BEARING HUB ASSEMBLY SHOULD COME WITH THE ABS ON YHE HUB , AT LEAST ALL THE ONES I'VE SEEN ARE LIKE THAT. I WOULD HAVE TO SEE THE HUB TO TELL YOU MORE BUT RAM 2500 HAS INBOARD AND OUTBOARD BEARINGS THAT CAN BE REPLACED WITH OUT BUYING THE WHOLE HUB

Aug 30, 2009 | 2001 Dodge Ram 2500 Truck

1 Answer

Abs pump motor on a 2000 dodge 2500 van will not shut off


sensors are in wheel bearings,you may have a bad bearing

Jul 25, 2009 | 2001 Dodge Ram 2500 Truck

1 Answer

Right front wheel bearing needs replacing,I see where the 2006 model is recalled for this problem, not the 2005?


Not sure if recall for 2005 models, I have one and the front bearings are packed in a hub, you have to remove the wheel, caliper and base and behind the hub theres 3 5/8" bolts, remove them and you will have a complete assembly removed.

Jul 08, 2009 | 2005 Dodge Ram 1500

1 Answer

I pulled the codes and here they are : C0036, C0035, C0040


Sounds like you need front wheel speed sensors. Replace the wheel bearings and sensors. May have an ABS unit fault, but more likely is both wheel bearings/speed sensors.

Jun 10, 2009 | 1999 Dodge Ram

1 Answer

Change wheel bearings in a 2005 Dodge Ram 3500 4WD


Go on the Dodge Ram and Cummins forums...they have tons of help....just google them

You can also get a free service manual for it at pdftown.com

Mar 21, 2009 | 2005 Dodge Ram 3500

1 Answer

2001 dodge truck four wheel drive


where do you buy them at. try buying a better brand. like from napa or carquest.

Jan 01, 2009 | 2001 Dodge Ram 1500 Truck 2WD

Not finding what you are looking for?
Cars & Trucks Logo

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...