Question about 2003 Kia Sedona

2 Answers

Headlight bulb replacemnent

I need to know how to remove the headlight inorder to change the bulb

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

You don't you unscrew the lamp holder and pull the bulb out and pry the bulb from the bulb holder asembly.

Posted on Jul 22, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Their is a small gray cap on the rear of the headligt. Remove the cap, bulb is inside of the headlight bezel. Has a spring type small wire bracket over the lamp. Pinch the bracket and the bulb will fall out.

Unplug the bulb and replace same manner. Also note if the light bulb is on the passenger side will possibly have to remove the windshield washer water holder, on the drivers aide the battery will have to come out to make the job easier.

Posted on Jul 25, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

How do I change the front driver side light bulb in a 03 Suzuki Grand Vitara 1.6?

Danielle, On the driver side you may have stuff in the way, which may have to be removed, to change bulb. Sometimes it is easier to remove headlight then change bulb and reassemble. Videos attached make it look fairly easy to change he bulb with out removal of headlight.
Check the attached links,instruction and guides, Good luck.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Suzuki Grand Vitara Headlight Bulb Replacement
Headlight Change 1999 2005 Suzuki Grand Vitara 2003 Suzuki Grand Vitara 2...
Auto Repair Maintenance How to Replace Headlight Bulbs
How to replace Suzuki Grand Vitara Tail Light Bulb

Jul 03, 2016 | 2003 Suzuki Grand Vitara

1 Answer

I need instructions on how to change the headlamp bulbs on a 2005 grand marquis. Please help.

To remove first you want to remove the headlight door mounting screws and remove the headlight door. Then you want to remove the 4 retainer ring screws and remove the retainer ring from the headlight. Then you want to pull the headlight bulb forward and detach the wiring connector.

To install you first want to a
ttach the wiring connector to the headlight bulb and place the bulb in position, locating the bulb glass tabs in the positioning slots. Then you will attach the bulb retainer ring to the assembly with the retainer ring screws. Then you will install the headlight door and secure with the screws. Then you will check the headlight bulb aim and adjust as necessary

Let me know if this helps you.

Mar 07, 2011 | 2005 Mercury Grand Marquis

1 Answer

My car 2003 altima I need change light bulb. need know how to remove head light to change the bulb.

You don't have to remove the headlight to change the bulb. The bulb can be removed from the back of the headlight, usually by turning the bezel ring that holds the bulb onto the headlight housing. Just make sure you do not touch the glass part of the bulb while replacing it or it will burn out again fast.

Jan 27, 2011 | 2003 Nissan Altima

1 Answer

Broken headlamp lense on 2000 Dodge Caravan

1. Disconnect the Battery and wait at least 2-minutes, inorder for Airbag Sensors to disengage.
2. Open the hood.
3. Remove the bulb: Turn the retaining ring (with ridges) counterclockwise approximately 1/8 to 1/4 turn. Pull the bulb out using the base of the bulb and not the wires.
4. Remove the bolt holding the Headlight Assembly to the Radiator Support Panel.
5. Remove the bolt on-top of the Headling Assembly.
6. Pull the Headlight Assembly out the front.
7. Disconnect any remaining electrical connections.
Let me know if this helped, or if you have any additional information or questions. Feel Free to contact me at!

Feb 03, 2010 | 2000 Dodge Caravan

1 Answer

How do I change headlight bulb . Left side low beam headlight bulb is blowed . I have the new bulb and just need to know where the lever or turn object is to remove from the back side so I can change the...

Reach beind the headlight and just unscrew the cap that holds it in. However don't touch the new bulb with your bare fingers or you will drastically shorten the life of the bulb.

Oct 16, 2009 | 2003 Chevrolet TrailBlazer

1 Answer


If you are only changing the bulbs, on the back of the headlight assembly, you'll see two metal retainers that hold the rear cover to the assembly.  Pop those outward from the headlight, and the rear cover will be loose.  Pull back on it, and you'll see the bulbs.  Turn the retainer counter-clockwise, and it will pull off, allowing you to remove the bulb.  Installation is the reverse of removal.

Apr 27, 2009 | 2000 Audi A6

1 Answer

How to replace blub in headlight

The entire headlight comes out from the exterior of the car. When you open your hood, there is a lever that you need to slide up. The light will then pop out and you will be able to replace the bulb and then pop the light back in. You will have to push hard inorder to get the lever to go back down. We had better luck with two of us doing it... one pushing... the other working the lever.

Apr 06, 2009 | 2003 Volkswagen Beetle TDI

1 Answer

I want to replace my Headlight with new projector light

If you are just trying to change the bulb, here is the correct procedure.

Step1 Set the parking brakeand remove the keys from the ignition. Make sure the headlamps are switched off, then open the hood using the primary and auxiliary release latches. Step2 Locate the back of the assembly containing the malfunctioning headlight bulb. If either the air intake cover or engine coolant reserve tank are blocking the bulb sockets, remove it and set it aside. Step3 Remove the electrical connector from the back of the bulb by squeezing its tabs and pulling it away from the socket. Step4Turn the bulb one quarter-turn counterclockwise and pull it out of thesocket. Headlight bulbs are fragile, so be careful not to drop orscratch it. Step5 Twist the new bulb into the socket and reattach the electrical connector to the socket. Step6 Test the new headlight to make sure it works before replacing the air intakemag-glass_10x10.gif cover or coolant tank and closing the hood.

Mar 21, 2009 | 1995 Honda Accord

1 Answer

Access light bulb

Hey inorder to acces the turn signals you have to remove the whole headlight encasement. It sounds liek a huge process but it's incredibly simple. there are 2 white clips that you can remove by pulling up on them and sliding them outward from the headlight encasement. Open the hood and theres on right in the corner and the other is on the opposit end of the headlight case.

Dec 20, 2008 | 1998 Oldsmobile Intrigue

2 Answers

Replace front head lihgt bulsbs on 350 z

you should be able to access the connector and bulb without removing headlight assembly. lift the hood and you should see the connector behind the headlight.

Aug 29, 2008 | 2003 Nissan 350Z

Not finding what you are looking for?
2003 Kia Sedona Logo

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers


Level 3 Expert

76691 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides