Question about Ford Bronco

1 Answer

How do you reset the feul pump shut off switch on an 89 ford bronco

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 813 Answers

The actual fuel pump relay is located in the engine compartment on the passenger side. You will have to remove the fuse box (it hinges at one end and swings up out of the way - you may have to remove the + cable that feeds it from the starter solenoid), and the relay box is located directly under the fuse box. Also, you can check the inertia switch which is located behind the carpet at the passenger footwell. The purpose of this switch is to interrupt power to the fuel pump in case of an accident. There's a red reset button on the top of this switch.

Posted on Jul 22, 2009

  • Chris Gamble
    Chris Gamble Dec 12, 2011

    on a 89 ford, truck, bronco. Inertia feul pump reset switch is 1 of 2 places. 1 is right side kick panel, beside passenger right foot, 2 is directly below radio under the dash.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power to the fuel pump on 2002 ford explorer changed the feul pump checked all fuses why no power to fuel pump


If the switch will not reset it's week you have two options replace or cut the wire and wire them together bypassing it I do it on all my then you should have power

Jan 07, 2015 | 2002 Ford Explorer

1 Answer

Where is the eec part on the ford taurus 1992 im looking for the feul relay system


I am not sure, but I believe the fuel pump relay on most Ford's is in the trunk, above the fuel pump.
There is an inertial switch that shuts off if bumped, and you have to manually push a button to reset it.

Aug 12, 2010 | 1992 Ford Taurus

1 Answer

No power to fuel pump


check the tan- lt green wire on the fuel relay that is located on the right fender, mine wasn't pushed in all the way, this wire shut down injectors and fuel pump, if you are looking for the shut off switch to reset the relay, it is on the passagers side floor board under the dash, gas two wires, orange and pink, I don't remember the color of the stripes, I removed this switch and wired them together without a problem

Mar 27, 2010 | 1988 Ford Bronco II

2 Answers

Is there a relay fuel pump switch for a 1987 ford bronco 2 If we straight wire it to the fuel pump it comes on but when turning on switch fuel pump will not come on.


I just had the same problem, today, check the tan- lt green wire on the fuel relay that is located on the right fender, mine wasn't pushed in all the way, this wire shut down spark and fuel, if you are looking for the shut off switch to reset the relay, it is on the passagers side floor board under the dash, gas two wires, orange and pink, I don't remember the color of the stripes, I removed this switch and wired them together without a problem

Jan 29, 2010 | 1987 Ford Bronco II

1 Answer

Fuel pump will not trun on


sometimes when u hit the bottom of the gas tank the feul pump will turn on. if this is the case then u have to replace the feul sending unit.

Nov 17, 2009 | 1994 Ford Bronco

1 Answer

Fuel pump switch


also known as the inertia switch is located on the left kick panel area by the emergency brake pedal . 90 full size bronko .

J5

Jan 16, 2009 | 1990 Ford Bronco

2 Answers

89 bronco II stars then dies


if the fuel pump cutoff was tripped it would not start at all, I know this for sure, I am a Ford dealer tech and I specialize in no starts and check eng lights. If the ignition switch is bad the 2 halves of the switch will be starting to come apart, it is very common, u should be able to either see it or feel it with your hand.

Jan 08, 2009 | 1989 Ford Bronco II

1 Answer

Bronco fuel pump 89 to 88


i dont think they will. you would be better off finding the right one versus trying to make something work and then you might have even more problems to deal with

Jan 05, 2009 | 1989 Ford Bronco

2 Answers

Bronco 2


possibly a fuel blockage. Is it getting fuel up the top?

May 23, 2008 | 1989 Ford Bronco II

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...