Question about Dodge Ram B250

1 Answer

Need to replace dash pad on 1996 Dodge Ram 1500. How do you get to the screws on the passenger side. Driver side screws are behing a bezel that easily comes off but passenger side I can't access.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 490 Answers

You have to feel and look with a flash light for all the bolts that hold the dash in place,at the same time move and disconnect wire harnesses.Then you can take it out.

Posted on Jul 23, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Where is the fuse box on a,98 Dodge RAM 1500

Leonard, interior fuse panel is open drivers door, at the end of dash driver side behind a small interior access panel, under hood fuse/relay center(box) is beside battery on inner fender.
Video links will show you fuse boxes location.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Interior Fuse Box Location 1994 2001 Dodge Ram 1500 1997 Dodge Ram 1500 5...

Dodge ram 1500 fuse box gone bad

Feb 29, 2016 | Dodge Cars & Trucks

1 Answer

I have a 2004 dodge ram 1500 with the 4.7 I have replaced the passenger side head lamp but can not get enough access to get at the driver side. Please help before I go at the front fender with a cutting...

i have the same year but i have a diesel....they come out the same way on both sides on my truck 2 bolts behing the grill and one under the outside edge of the light housing, between the bumper cover and the light housing...10mm i believe

Feb 16, 2011 | 2004 Dodge Ram 1500

1 Answer

Where is the IAT sensor on a 1996 Dodge Ram 1500 with a 5.2L V8?

Intake Air Temperature sensors are usually located after the air breather filter on the air breather but this one is located on the right side of the intake (passenger side) just behing alternator

Jan 03, 2011 | Dodge Ram 1500 Cars & Trucks

1 Answer

How do you remove the factory installed Raido from the dash,on a 2001 ram 2500 4X4

undo battery remove dash bezel(cover) usually screwed and clipped in less than obvious places like above ash tray upside down remove 2 lg bolts slide out and unplug Hope they didn't get fancy with security codes and bolts!

Jan 14, 2010 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

How to replace a heatercore in a 1995 dodge ram 3500

your heater core is inside the big black box under the dash on the passenger side. you'll have to pull the dash out. then remove the black box, usually there are bolts on the firewall in the engine bay that hold it in place.disconnect the ac lines and heater hoses. remove the box and then the screws all the way around it to open it up. replace the heater core and reassemble. you'll have to recharge the freon when you are done to have ac again.

Oct 21, 2009 | 2000 Dodge Ram 1500 Truck

1 Answer

Front seat in 1996 Dodge Ram Pickup won't slide forward or back

1.Make sure the stiff wire that crosses under the seat to the passenger side latch hasn't come off. 2.Soak the slides with some good penatrating oil (NOT WD40!).

May 30, 2009 | 1996 Dodge Ram 1500 Club Cab

1 Answer

How do I get the brake pads off a 2004 Dodge Ram?

Take your tire off, unbolt your caliper which is holding you pads to the rotor, and then just take a flat head screw driver and lightly take the pads out of the clips but if your replacing the pads its always a good idea to replace the clips.

Jan 20, 2009 | 2004 Dodge Ram 1500

1 Answer

How do you change the mirror on a 96 Dodge Ram 1500?

All D/W-series standard and wide-view exterior mirrors are removed by removing the mounting screws and lifting off the mirror and gasket. Low-profile wide-view mirrors are removed as an assembly by removing the 4 mirror brace mounting screws from the door.

Good luck..

Jan 06, 2009 | 1996 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

620 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides