Question about 2005 Dodge Ram

1 Answer

Same problem here, just started, cool on driver warm on pass side

Were do i start to fix this?

Posted by on

  • yadayada
    yadayada May 11, 2010

    no information on what the problem is.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 71 Answers

What's the problem?

Posted on Jul 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gets warmed up then will not start until cool. Replaced crankshaft sensor did not fix problem


Are you a diesel engine if you are its the cam position sensor, its on the lower front on the driver side,they are common symptoms it warms up and you stall, just replace it ,make sure connections are good,

May 04, 2011 | 2006 Ford F 350 Super Duty

1 Answer

2002 volvo v70xc, car has dual climate controls, drivers side a/c blows cold, passenger side is only cool to warm, both setting are on the coldest setting.


Have same issue with my xc70 cold to coolish on drivers side and warm to hot on pass... slowly, with driving, pass side becomes cool. Slight swoosh sound from dash attributed to A/C is intermittent. Thought to be kinked tube or puncture? : (

Thoughts?


Jun 22, 2010 | 2002 Volvo V70

1 Answer

1998 corvette cold air blows out driver side warm air out pass side cant change driver side also fan one speed


you need to replace the temperature actuator on the left side of heater evaporator case, also ck the blower resistor and connection that should fix ya up.

Nov 04, 2009 | 1998 Chevrolet Corvette

1 Answer

WHAT IS WRONG WITH THE AIR CONDITIONER IF THE 2 RIGHT VENTS BLOW COLD AIR BUT THE LEFT VENTS BLOW THE CIRCULATED VENT AIR (WARM)


By my experience you have a low charge, it sounds nuts, but for some reason it will blow warm on pass side and cool on driver side with low charge.
If the charge is correct, than you have a actuator issue.
It will have to be looked at for proper diagnosis.
I would start with a a/c performance test.

Aug 04, 2009 | 1997 Buick Century

1 Answer

Cold air on pass side, hot then cool and event cold on drivers


seems like you dual climate switch is malfunctioning, try replacing the climate control cluster and im pretty sure that'll do it

Jul 11, 2009 | 2000 Oldsmobile Intrigue

1 Answer

2002 Dodge Neon wont start when warmed up


The starter is most likely bad and needs to be replaced,either the solenoid or motor are binding when it heats up and the parts expand,I can't pinpoint the exact cause because you haven't indicated if you hear the solenoid click wwhen you try to start it warm.I realize the starter has been replaced,but with a remanufactured unit they are not tested when they are warm and a bad unit will pass and be rebuilt.

Jun 01, 2009 | 2002 Dodge Neon

1 Answer

Blower temps


You have a bad temperature control actuator on the driver side. Before you change it make sure that it has not lost its memory . You can reset the system by diconnecting the battery for 10 minutes hook it back up and then start the truck. Turn the system on and let it go thru its reset it will do it all by its self do not touch any of the controls for about 5-6 minutes if it still acts up replace the actuator . Remember to do the reset after you put the new one in.

May 29, 2009 | 2004 Chevrolet Silverado 1500 Crew Cab

1 Answer

91 accord won't start while warm


Easy, replace the pgmfi / main relay, way up under the dash on the drivers side. It's about1x1x2 inches and says "mitsuba" on the side.

May 01, 2009 | 1991 Honda Accord

1 Answer

I replaced all the brake lines then the bleeder valve(I am not sure of the actual name) cracked and exploded when I went to bleed the lines how do I fix it without going to a repair shop.


WHEN YOU BLEED THE LINES, IT WILL CRACK AND POP..ITS GETTING ALL THE AIR OUT ON THE LINES..START WITH THE PASS.SIDE REAR, GO TO THE DRIVER SIDE REAR, THEN PASS. SIDE FRONT THEN DRIVER SIDE FRONT..YOU HAVE TO START WITH THE WHEEL THE LONGEST DISTANCE FROM THE MASTER CYLDER.. HAVE SOME ONE THE PUMP THE BRAKES THREE OR FOUR TIMES, ON FOUR TIME HAVE THEM TO HOLD THE PEDAL DOWN, THEN LOOSEN THE BLEEDER VALVE (WITH THERE FOOT STILL ON THE PEDAL) AFTER YOU LOOSEN TIGHTEN BACK UP AND REPEAT THREE OR FOUR TIMES ON EACH WHEEL.. BE SURE TO START WITH PASS. SIDE REAR, SO ON AND SO FOURTH.. THIS WILL FIX YOUR PROBLEM..GOOD LUCK KEITH...

Mar 14, 2009 | 1989 Buick Skylark

1 Answer

A/c and heater


Is it leaking antefreeze?
The thermostat might be gone or needs a bigger thermostat
It could be a vaccum leak for the drivers side blowing cool air and the passenger side blowing warm air
Does it have dual air control switches one for drivers side and one for passengers side?

Oct 28, 2008 | 2003 Pontiac Grand Prix

Not finding what you are looking for?
2005 Dodge Ram Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...