SOURCE: 1995 Plymouth Acclaim Cylinder Head Removal
Honestly... If you are really not that good at mechanical issues you probably should take it in... Not to be mean but the head needs to come off in a bolt sequence and reinstalled in a bolt sequence with the correct torque... The passenger motor mount,exaust,wire harness,valve cover,head boltscoolant hoses,throttle cable and many more items need to be removed......Also NOTE:... slip and tuck head gasket jobs are NOT advisable and ussually result in doing the job twice over..... The heads have a tendency to warp and also crush in the gaskets over time....The head should be checked for warpage. Also a good time to do the valves and replace seals.......in the end if you are not experienced and do not have someone around that knows aboput the job at hand you may want to have the job done by a tech... For fun grab yourself a Chiltons manual and read through........
Good luck
Robb
SOURCE: where is the heater motor located on a 1991 plymouth acclaim?
hi there here is the answer to your question.....the heater motor or blowere motor is located in the dash under ur radio..it will be an easy find once you have removed the radio...let meknow if u have any other questions thank you
SOURCE: 1991 plymouth acclaim break & signal lights not working
try checking your ignition swich or your asd relay it is under the hood on the driver side mounted to the wall
SOURCE: plymouth acclaim ignition repair
the ignition cylinder will run you about 20$ and it is fairly easy to change you can change it yourself buy the chilton book (it will help later) and it will be cheaper than paying for labor although the entire replacement will take less than 30 min
SOURCE: change wather pump 1991 plymouth acclaim
Try (autozone.com ) & sign up for free access to manuals, pictures, step by step instructions plus parts prices. Just enter your vehicle info & go to manuals, click on engine & engine overhaul, then scroll down left side & click on water pump.
130 views
Usually answered in minutes!
×