Question about 2001 GMC Jimmy

1 Answer

Need to reprogram new keyless entry fob.Thanks.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • GMC Master
  • 3,854 Answers

You may program up to 4 transmitters, using following procedure: 

Transmitter Programming Procedure (No Tools Required) 
Close all the vehicle doors. 
Insert the ignition key into the ignition lock cylinder. 
Press and hold the door unlock switch. 
While holding the door lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF. 
Release the door unlock switch. The doors will lock and unlock to confirm the program mode. 
Press and hold the LOCK button and the UNLOCK button simultaneously on one transmitter. After a delay of approximately 15 seconds, the doors will lock and unlock to confirm the programming of that transmitter. 
Repeat the previous step to program up to four transmitters. 
Turn the ignition switch to the RUN position in order to exit the key-less entry transmitter mode. 
Operate the transmitter functions in order to verify correct system operation 

Posted on Jul 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you reprogram a key fob for an aurora to a oldmobile alero


yes if it is the same style fob but if the fob is remote start need a dealer to assist in the reprogramming
Free Keyless Remote Fob Entry programming instructions procedures for all...

Nov 23, 2016 | Cars & Trucks

1 Answer

Bought a used keyless entry remote key fob, how do I reprogram it to a 2008 suzuki sx4?


the operators guide covers this.
lost that? (in the glove box is was)

Jul 02, 2014 | 2008 Suzuki SX4

1 Answer

How does key fob work


Depending on the specification of your vehicle, the FOB generally serves one (or both) of the following functions:

1) Communicate with the vehicle's Keyless Entry system (operates central locking).
2) When inserted into the ignition, the transponder within the key will communicate with the vehicle's Body computer (BEM) to validate entry, before disengaging the immobilizer - allowing the vehicle to start.

When the key fob fails, you may lose functionality of the above systems.

Keyless entry failure - usually due to flat battery in the fob. Reprogramming of keyless entry can be done without dealership assistance.

Transponder/Immobilizer failure - this requires the key fob to be re-programmed by your local dealership.


Hope this helps....

Nov 28, 2011 | 1998 Toyota Camry

1 Answer

Mazda 3 yr 2004


Fords "better idea"...go to an automotive stereo shop that does keyless entry install for around $89...it's the cheapest way to go anyway. Dealer will have to reprogram the FOB, you're looking at $100+

Jun 14, 2009 | 2004 Mazda 3

1 Answer

Need to program fob L22733524 2006 Grand Prix GT. Bought fob off ebay.


GM FOBS cannot be reprogrammed at home...Dealer ($90-125) or go to a local car stereo shop and get their new keyless entry installed ($89)
Good Luck

Jun 14, 2009 | 2006 Pontiac Grand Prix

1 Answer

Keyless FOB not opening locks


You may have to car to Chevy Dealership to reprogram keyless entry.

Apr 27, 2009 | 1998 Chevrolet Monte Carlo

1 Answer

1997 Toyota Avalon Key Fob is not working


you can take it to a dealer and they can reprogram it for you.. good luck keith...

Mar 21, 2009 | 1997 Toyota Avalon

2 Answers

Door handle stuck


need to remove door panel either the linkage clip either broke or disconnected --if have remote start on fob need dealer to program--if normal try these links
Lexus Free Keyless Remote Fob Entry programming instructions Free Keyless Remote Fob Entry programming instructions procedures for all...

May 13, 2017 | 1998 Volvo V70

Not finding what you are looking for?
2001 GMC Jimmy Logo

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...