Question about 2001 Chrysler Town & Country

1 Answer

2002 town and country non-power sliding door won't unlock driver

Automitaic locks won't work on this door and am also unable to manually pull up the button?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 6,982 Answers

Sounds like the actuator has frozen up (electric solenoid that moves lock mechanism) You can remove the door panel and spray wd40 into it through the small rubber boot where the linkage enters the solenoid and try to work it up and down, but generally if it's very frozen, it will need to be replaced.

Posted on Jul 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power door lock inoperable on driver sliding door only on 2009 town and country


Check the fuse, wires and the motor, could be some bad connection too

Mar 20, 2013 | 2009 Chrysler Town and Country

2 Answers

My passengers side sliding door won't unlock. I was able to get the inside trim off the door and expose the inner workings but was unable to unlock the door manually. As i was trying to put enough...


Look at the other door and look on the front edge to see where the child safety lock switch and see if that is the problem with the other door. That has happened with mine several times. Someone will play with it leaving it on so it can't be opened.

Jul 20, 2011 | 2002 Chrysler Town & Country

1 Answer

The power lock (driver's side sliding door) on our 2003 Chrysler Town & Country Van will not work. We have to manually lock and unlock the door. How can this be fixed?


Take a look at end of door where latch is & post where the 2 meet when closed. Look for round metal button/contacts, about 1/2" in diameter. If you look close, they should line up to make contact with each other when door is closed. Take some fine steel wool (preferred) or fine sandpaper and scuff them up until you see metal is clean on both surfaces. Now try it, and let me know what happens.

Mar 06, 2009 | 2003 Chrysler Town & Country

1 Answer

Sliding door will not unlock


hell . you might check the fuse's that work the door lock;s look at you owner's manul good luck

Feb 08, 2009 | 2002 Chrysler Town & Country

1 Answer

My 2001 Chrysler Town & Country passenger sliding door won't open


your door panel can come off and you can access internal door locking mechanism from inside car first inspect to see all rods are hooked into plastic sleeves then make sure lock is disengaged by pulling rod towards rear of van it should then be able to be opened easily if not your locking mechanism is frozen inside of door between a pillar and door it will have to be pushed to open from inside of door panel once you do that door will open if you cant make lock work manually once this is done replace locking mechanism or rods accordingly.

Feb 02, 2009 | 2002 Chrysler Town & Country

2 Answers

2002 Chrysler T&C sliding door won't UNLOCK w/ Switch or Key FOB


the other locks work correctly.

quick fix is to clean the contacts that the door makes when you close it. there are contacts on the door pillar (probably look like little copper circles) on the door itself there will be some spring loaded contacts... make sure they work freely and are clean.

Robert

Sep 08, 2008 | 2002 Chrysler Town & Country

1 Answer

2006 chysler town and country


There should be a manual shut off switch for the doors. shut off the power to the doors then manual open it. you should be able to overcome any debris in the track. then you can clean it out. it the door is locked and won't unlock, the fuel door may be open or cracked open enough to not allow the door to unlock. there is a lever or switch that prevents the door from opening when the fuel door is open.

Jul 20, 2008 | 2006 Chrysler Town & Country

Not finding what you are looking for?
2001 Chrysler Town & Country Logo

381 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...