Question about 1992 Hyundai Excel

1 Answer

How do i remove the brake drum from a 1992 hyundai excel?

Posted by on

  • dscurr Jul 23, 2009

    I need more specific instructions. the wheel is off, the brakes are released. Do i have to remove the large nut in the centre of the drum? If so is there a trick to this? if not what and how do you suggest i apply force to remove the drum?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 382 Answers

Dear friend-the reason why you can not remove the drum is that the shoe is inbedded into the drum,there is a ridge in the drum holding the drum and shoe together,try and release the brake,if not you will have to apply force to remove drum,it might brake the spring clips but that can be replaced,good luck.

Posted on Jul 22, 2009

  • dear friend-the hub and drum is two units.maybe the drum is rusted onto the hub knock it with a copper hammer to release.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change the brake drums


For drum brake related problem,i suggest you to go through this help links.Clickj the link below for troubleshooting procedure:-----How to service Drum brakes?http://repairhelpcenter.blogspot.in/2012/02/how-to-service-drum-brakes.html--------What type of problems usually noticed on Drum brakes?http://repairhelpcenter.blogspot.in/2012/02/what-type-of-problems-usually-noticed.html---------How to test Drum Brakes?http://repairhelpcenter.blogspot.in/2012/02/how-to-test-drum-brakes.html
---------How to inspect brake drums?http://repairhelpcenter.blogspot.in/2012/02/how-to-inspect-brake-drums.html
---------This will help.Thanks.

Jan 23, 2012 | 1994 Hyundai Excel

1 Answer

Had no auto matic adjusting lever can I put new brake shoes without replacing adjusting lever on 1994 Hyundia excel rear brake driver side


The rear brake drums are drum brakes on the 94 excel. The Excel uses the front brakes the most, so are you sure you need to replace the rear brakes?

Jan 06, 2011 | 1994 Hyundai Excel

1 Answer

I have a 1995 Hyundai excel, and brake fluid is coming out of rear brake. I haven't taken wheel yet to see if I can fix it. But looking underneath car I can see Floyd coming out of rear drum housing. Is...


If you have rear brake drums, (I think you do) it will be a wheel cylinder, or a broken brake line. The wheel cylinder is inside of the drum, and the line that goes to it will be on the inboard side.
Fixable by a novice? Hard to say, as you need to be able to bleed the brakes, after replacing the part.

Sep 18, 2010 | Hyundai Excel Cars & Trucks

3 Answers

The rear drum wont come off as i would expect


Yes, Undo the 32mm nut, first. And, don't get the bearings dirty with dust from the brake drums, or , if you do, replace the inner and outer bearings with new greased up ones.prev.gif next.gif REAR DRUM BRAKES Brake Drums REMOVAL & INSTALLATION CAUTION
Brake linings contain asbestos. Asbestos is a known cancer-causing agent. When working on brakes, remember that the dust which accumulates on the brake parts and/or in the drum contains asbestos. Always wear a protective face covering, such as a painter's mask, when working on the brakes. NEVER blow the dust from the brakes or drum.
  1. Raise the vehicle and support safely.
  2. Remove the wheel and tire assembly.
  3. On vehicles without rear bearing hub, remove the dust cap, cotter pin, nut lock, wheel bearing nut and washer from the spindle. Remove the outer wheel bearing. Remove the drum with the inner wheel bearing from the spindle. If the drum is difficult to remove, remove the plug from the rear of the backing plate and push the self adjuster lever away from the star wheel. Rotate the star wheel to retract the shoes. Remove the grease seal.
  4. If equipped with a rear bearing hub, remove the drum by removing the retainer screws from the drum and pulling the drum from the hub assembly. If the drum is difficult to remove, remove the plug from the rear of the backing plate and push the self adjuster lever away from the star wheel. Rotate the star wheel to retract the shoes. To install:
  5. On vehicles equipped without rear bearing hub, lubricate and install the inner wheel bearing. Install a new grease seal. Install the drum to the spindle. Lubricate and install the outer wheel bearing, washer and nut. Adjust the bearing preload following the procedure outlined in the "Rear Wheel Bearing'' of this section. When the bearing preload is properly set, install the nut lock and a new cotter pin. Install the grease cap.
  6. On vehicles with rear bearing hub, install the brake drum to the hub assembly and install the retaining screws.
  7. Install the wheel and tire assembly. Adjust the rear brakes as required.
  8. Apply the brakes until a firm pedal is obtained, prior to moving the vehicle.

Jul 12, 2010 | 1991 Hyundai Excel 4 Door

1 Answer

How do i remove the brake drum of a 1997 hyunidai excel do i need to remove the centre nut that also takes out the wheel bearing


With Rear Hub Bearing
  1. Raise the vehicle and support safely.
  2. Remove the wheels.
  3. Remove the dust cap, cotter pin and loosen the locknut
  4. Remove the washer and outer wheel bearing.
If the drum is difficult to remove, remove the plug from the rear of the backing plate and push the self adjuster lever away from the star wheel. Rotate the star wheel to retract the shoes.
  1. Remove the drum with the inner wheel bearing from the spindle.
To install:
  1. Install the drum on the spindle.
  2. Install the outer wheel bearing and washer.
  3. Tighten the locknut to 108-145 ft. lbs. (150-200 Nm). Turn the brake drum while tightening the spindle nut to seat the wheel bearings.
  4. Install the cotter pin and dust cap.
  5. Install the wheels
  6. Adjust the rear brakes.

Apr 23, 2010 | 1997 Hyundai Accent

1 Answer

I have a 1990 hyundai excel,how can i adjust the emergency brakes to hold more when i pull up the handle?


the rear brakes should be DRUMS..on each drum is a STAR like wheel..you move each one OUT to make brakes to push (OUT) against harder on the drum..refer to a manual for more directions and pictures...make sure the brake cable is NOt worn out or broken . Also, replace the rear brake shoes if needed

Jan 08, 2010 | 1990 Hyundai Excel

1 Answer

Changing front and rare break pads in hyundia excel


this front::
  1. Raise and support vehicle, then remove wheel/tire assembly.
  2. Remove lower bolt and caliper assembly. Position assembly aside using suitable wire.
  3. Remove brake pads and shim.
  4. Bottom piston in caliper using suitable tool.
  5. Install new brake pads and attach shim to the outer pad. Tighten lower bolt to specifications.
this for rear::

1. Raise and support vehicle, then remove wheel/tire assembly.
  1. Remove axle nut, then the hub and drum assembly.
  2. Remove end shoe springs, cylinder and hold-down spring.
  3. Remove shoes and adjuster as an assembly.
  1. Reverse removal procedure to install, noting the following:
    1. Apply suitable grease to backing plate shoe contact surfaces.
    2. Install shoe hold-down pin, then assemble return spring with the pushrod shortened.
    3. Pull parking brake lever fully upward. Repeat process several times.

Jun 04, 2009 | 1994 Hyundai Excel

1 Answer

How to remove brake drum rear wheel 2004 Hyundai Elantra


Jack up rear of car till tire is off the ground.
Remove lug nuts & remove wheel.
Remove phillips screw(s) from drum.
Using a hammer, strike the drum to loosen it from the hub.
Remove drum by simutaneously turning it and pulling it outward away from the vehicle.

Mar 17, 2009 | 2004 Hyundai Elantra

1 Answer

Squeaky brake when cold


If your rear brakes are making the noise take off the rear drums and spray some brake clean in there on both shoes and the drum let all parts dry which wont take anywhere from 30 seconds to a minute or two depending on the brake clean also if you want you can have someone take a piece of emry cloth to your front rotors and scuff them up a bit with about 80 to 100 grit emry and spray them and the pads off with brake clean let it dry to you can emry the pads to this will get most if not all the glaze on pads and rotors.

Feb 19, 2009 | 1994 Hyundai Excel

Not finding what you are looking for?
1992 Hyundai Excel Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...