Cars & Trucks Logo

Related Topics:

What would cause the rpm gauge on a Ford Windstar 2000 to stop working properly? It registers to about 1 rpm.

5 Related Answers

Anonymous

  • 116 Answers
  • Posted on Apr 11, 2009

SOURCE: 1998 Ford Windstar Transmission to 2000 Ford Windstar

while it is possible to perform that swap, the newer 2000+ transmissions will have updated internals and such.

so will it work............. yes.

is it optimal.................no.

Ad
emissionwiz

Marvin

  • 85242 Answers
  • Posted on Jun 03, 2009

SOURCE: gas gauge not working right for 2000 silverado

the only thing that will cause this symptom is the fuel tank sending unit.

Anonymous

  • 404 Answers
  • Posted on Jun 13, 2009

SOURCE: speedometer, rpm gauges not working

sounds like a fuse

Anonymous

  • 16 Answers
  • Posted on Aug 21, 2009

SOURCE: 2000 ford windstar speedometer and odometer problem

Could be a ciggerette lighter fuse, usually cause this when it blows.

Anonymous

  • 3 Answers
  • Posted on Dec 27, 2009

SOURCE: 2000 FORD WINDSTAR will not start

there should be a relay switch on the passanger side in the floor board up to the firewall or look in the manual for it.... if your car wont start cause its starvin for gas it could be the fix...find the switch or button and press it it restarts your fuel sending unit

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2000 ford windstar stalls at 2000 rpm some times dies i no its not the dpfe

Good Evening, I have had a few of these on the car lot and noticed a few inherited problems that can cause what you are talking about. First thing is a coil going bad, second is those darn plenum and intake gaskets which cause a vacuum leak which causes the engine to develop a miss not only at low rpm but also at higher. I cannot say that it is your problem without coding it, but give you some insight into possibilities. Hope this helps.
0helpful
1answer

Speed gauge for a 2000 ford windstar?

check fuses under the dash. VSS may need replacment as well
.
0helpful
1answer

2000 ford windstar 3.8L Front heater has

what stopped? the air doesnt blow,if thats the case then replace the blowermotor resistor, its located on heater box on passengerside next to blower motor.hope this helps, let me know if this was the problem.
2helpful
3answers

Why are my gauges in my ford windstar going crazy when its turned on they go all aroun

I know the speed sensor will cause the gauges to stop working in a windstar maybe the speed sensor is going out ....
1helpful
1answer

2000 ford windstar speedometer and odometer problem

Could be a ciggerette lighter fuse, usually cause this when it blows.
0helpful
1answer

RIGHT STOP LIGHT WORKS IRREGULARLY(2002 FORD WINDSTAR)

thereis three switches to check one is the muti function switch. the second is the headlight switch and third is the brake switch on the pedal.if not them check your ground and see if it is secured properly
1helpful
2answers

RPM gauge

Crnkshaft position sensor
Not finding what you are looking for?

55 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...