SOURCE: need a wiring diagram for both these pickup(not audio)
what part of wiring diagram ? and i might be able to email it to ya
SOURCE: Firing order & diagram for distributor cap for
It is 1-8-4-3-6-5-7-2 with 1-3-5-7 on the drivers side front to back, 2-4-6-8 on the pass side and the dist turns clockwise.
I wish I still had my Chilton's manual, I would scan a picture for you.
If this helps, please rate me.
Thanks,
Matt
Testimonial: "Just the info I needed, THANKS VERY MUCH."
SOURCE: 1985 Dodge Ram Pickup Truck The front brakes
your pressure metering valve could not be working as it should,follow you brake lines down from the master cylinder to the frame rail it is on the inside of the frame rail and the front lines and back lines come out of it,on the front of the valve there should be a small ruber boot there the boot can be removed and inside on the valve you will see a small pin that goes into the valve it should be able to be moved in and out if not it could be rusted stuck and that could cause your front brakes to not release the pressure and cause your problem,i have a 1984 that did the same thing,hope this helps you.
SOURCE: 1985 Dodge pickup. Turn on blinkers they all flash.
i belive the problem is in your steering colum where your signal switch is remove the steering wheel and check the switch if thats not it then you have 2 bare wires touching
23 views
Usually answered in minutes!
×