Question about 2002 Ford Mustang

3 Answers

Belt squeaking causing motor to die on a 2002 ford mustang v-6

The belt squeaking on a 2002 ford mustang v-6 causes the motor to die while driving the car.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 23 Answers

I would bet that there is a pully on one of the accessories that is about to stop turning. I would remove the belt and make sure that all of the acc. turn with out to much effort. I.E. altnator the tenstioner, as well as the a/c and idler pullys.

Posted on Jul 22, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Check the camshaft position synchronizer.

Posted on Jun 07, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 140 Answers

Sounds like your belt for your altenator has worn out. Replace as soon as possible.

Posted on Jul 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What causes 2002 mustang 4.6l to rev up on its own when driving


Hi is it manual or automatic does it rev when driving in top gear 4th or drive in auto over 30 miles per hour

Feb 07, 2015 | 2002 Ford Mustang

1 Answer

Idle surging down a little when at stop lights in my 2000 mustang 3.8 never dies but seem's close.every 6 to 10 seconds no difference noticed while driving down the road. changed AIC valve for a c


probably cause by the a/c cutting in and out or running at idle . Fit an idle compensator to the system throttle or raise the idle speed 300rpm.

May 26, 2013 | 2000 Ford Mustang

2 Answers

2002 Ford Mustang pulley squealing


Replace the crank pulley before it costs you an arm and a leg. It has caused this problem. don-ohio

Mar 26, 2017 | Ford Cars & Trucks

2 Answers

What makes a belt squeak?


Belts squeak for the same reason tires do when they spin. They are slipping. Something isn't turning as fast as the belt wants it to. On ford it's usually ether the idler sprocket or the tensioner. If you remove the belt and try spinning all of the pulleys by hand.( note the crank wont spin freely) you will usually be able to tell witch ones slipping.

May 14, 2011 | 1999 Ford Taurus

1 Answer

2002 mustang GT serpentine routing


Hope this helps ya.. Cobra... :-)
f9fd01b.gif

Item Part Number Description 1 10344 Generator pulley 2 8620 Drive belt 3 8A528 Water pump pulley 4 3D673 Power steering pump pulley 5 63126 Crankshaft vibration damper 6 2E884 A/C clutch pulley 7 6B209 Drive belt tensioner 8 19A216 Belt idler pulley 9 19A216 Belt idler pulley

Jun 14, 2010 | 2002 Ford Mustang

1 Answer

I was driving down the road and all of the sudden it lost power. I pushed the gas and nothing. I pulled to the side of the road and it died. When I try to restart it, it cranks but doesn't turn over. I...


Ignition Control Module is bad. When the dielectric grease used to mount them gets hard,they overheat and cause you to shut down. Really easy to install(about 10 mins.). I had this happen on two Fords. If you let the engine sit and cool down,they will fire up and run till that part gets hot,then itll die on ya. Auto zone sells this part for around 35 bucks.

Apr 30, 2010 | 2002 Ford Mustang

1 Answer

2005 ford focus engine dies with obd ii codes 1233 & 1235. Also clears radio time and trip odometer.


CODE PO1233 - FUEL SYSTEM DISABLE OR OFF LINE.POSSIBLE CAUSE. INERTIA FUEL SHUTOFF IFS SWITCH NEEDS TO BE RESET.FPDM GROUND CIRCUIT IS OPEN OR SHORTED. CODE PO1235 FUEL PUMP CONTROL OUT OF RANGE. POSSIBLE CAUSE FP CIRCUIT IS OPEN OR SHORTED. FPDM IS DAMAGE. PCM HAS FAILED.

Sep 25, 2009 | 2002 Ford Mustang

1 Answer

I have a 1992 Ford Mustang 2.3L. The timing belt broke when I was driving and the motor shut down fast. I have replaced the timing belt and set the timing. BUT NOW I have no spark. any ideas..


Check your crank sensor. Sometimes, it can be put back in backwards causing no signal from the crank, therefore no spark. Check to see if there is signal coming out of the sensor, this is the first step to FixYa.

Aug 31, 2009 | 1992 Ford Mustang

1 Answer

Squeak in front of engine 2002 taurus


I assume that the noise changes with engine RPMs, not vehicle speed since you mention washing down the engine - something pretty hard to do if the car is going down the road-
Is it possible that what you describe as a squeak is instead a whistle? The symptoms you mention related to water could mean that an intake manifold gasket (or another part of the intake system) has a bad gasket and is causing a whistling noise from air being pulled in where it shouldn't happen. If the failed gasket is allowing water into the intake system, that would explain why the engine sounds like it wants to die. 
You might take a 2-foot length of vacuum hose or similar, hold one end to your ear and move the other end around the engine to see if you can more accurately isolate the source of the noise, be it squeak or whistle.    Obviously, don't hold the hose too tight in case you get tangled up with a belt or rotating part.
Good luck-

Nov 10, 2008 | 2002 Ford Taurus

1 Answer

Load squeaking when running dies sometime


all pullys should be moving in the serpentine belt, if one is not moving than that would cause friction and belt winning. replace what ever that pully is attatched to the bearing is ceased.

Sep 25, 2008 | 1990 Ford LTD Crown Victoria

Not finding what you are looking for?
2002 Ford Mustang Logo

Related Topics:

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...