SOURCE: how do you replace an in cabin micro filter on a
Remove instrument driver lower cover.
Remove accelerator pedal assembly.
Remove filter cover and then remove in-cabin microfilter.
SOURCE: LOCATION OF BLOWER RESISTER
The Lancer blower motor's are known to heat up and burn out. If you remove it, it is labeled with "Do Not Repair", but it is possible. If you look inside of the block, you will see a flap sticking up - that needs to be soldered down in order to work in the 1 - 3 positions.
The Blower resistor is located on the passenger side under the dash, in the air plenum left of the blower motor.
Thank you for using fixya, and good luck
SOURCE: "2008 nissan rogue problem shifting
It is the battery. It is bad and shorting out. Check the manual for directions to trouble shoot until you replace it. There is a small button that you need to remove next to the shifter, place the key in the hole and hold for about 10 seconds. It is a shift release.
I had the same problem. Fixed!
SOURCE: CODE P0444 2008 NISSAN ROGUE
Hi,
Thank you for contacting fixya.com. CODE P0444 means Evaporative Emission System
Purge Control Valve Circuit Open Please check this links from Nissan forum to
get a detailed idea related to this code. http://engine-codes.com/p0444_nissan.html http://www.permoveo.ltd.uk/tabid/122/OBD-Error-Code/P0444/Diagnostics/Nissan/Default.aspx Please get back to us if you have further
query else please accept the suggestion.
SOURCE: 2008 nissan rogue blower not
Hi,
First check the fuse for that a/c blower. replace with the same amperage if broken.
If it is still okay the problem will be the resistor block, this part control the speed of your a/c and heater blower. It is located behind the glove box compartment, inside the blower housing. There are some wiring connected to it.
The part is available in your Nissan parts center or any parts dealer in your area.
Hope that helps you out.
Thanks for using FixYa!
93 views
Usually answered in minutes!
×