Question about 2005 Dodge Grand Caravan

1 Answer

I cand get the bottom bolt out of the AGR valve on a 2005 dodge grand caravan. Any suggestions. It hs to cloase to the alternator. I cant find any info on removal of the alternator If i need to go that route

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,011 Answers

Dont take out the alternator you need a 10mm swivel socket to get to the bolt but you can get to it .go to sears the socket is about $7 .I have done numerous egr valves on these caravans :)

Posted on Jul 22, 2009

  • hemanav Mar 05, 2011

    Hello, I've tried removing the bottom bolt, but can't get it to budge, have short and extension 10mm sockets, any ideas before I 'chew' up the bolt?

    Thanks

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 dodge grand caravan 3.3l. Where is the ecm located?


It is bolted to the left front frame (drivers side) of the engine compartment just in front of the battery.

Nov 16, 2014 | 2006 Dodge Grand Caravan

1 Answer

How do you release the tension from the serpentine belt tensioner for a 2005 dodge grand caravan?


most any auto zone or advance auto should print you out a diagram and let you use a tension tool by just leaving a small deposit to insure it's return. Should be a small wheel about 4" across with a bolt in the center. putting the tool or a half inch drive socket that fits the bolt head and turning clockwise should release tension but sometimes they're hard to get at hence the tool. usually just below the alternator and/or power steering resevoir.
hope this helps you

Nov 19, 2010 | 2005 Dodge Grand Caravan

1 Answer

Remove alternator 2005 dodge grand caravan and reinstall repaired alternator


remove the metal support beam that holds your radiator, and the elec fan.

Mar 16, 2010 | 2005 Dodge Grand Caravan

1 Answer

Main bolt for alternator has been removed.


a 1/4"10 mm swivel will break it loose then it sould only be finger tight i have never crossed one any tighter keep the top on tight until the bottom comes loose

Sep 04, 2009 | 2006 Dodge Grand Caravan

1 Answer

2005 dodge grand caravan getting code p0406


3.3 engines has the egr valve with transducer.you have to replace the whole unit. code p0406 what its trying to tell you your egr valve circuit is short to ground.it has failed .

Jul 04, 2009 | 2005 Dodge Grand Caravan

1 Answer

Replacing the EGR valve on 2004 caravan 3.3 L


This is how I do it, maybe it will work for you too. Remove the top bolt. Using a prybar, roll the egr backwards towards the engine. This roll is also in the direction the bottom bolt has to turn to come out. From the new angle you can use a wrench or 1/4 drive wobble on it. When it gets back to the point you can't get the wrench on it, use needlenose pliers on the threaded end to finish the removal. Going back is a little tricky, start the bottom bolt and run it in almost all the way and then roll the egr forward to start the top bolt. Tighten the bottom the best you can first. Tighten the top bolt last, this puts more pressure against the bottom bolt making it tighter. Otherwise you have to remove the alternator.

May 16, 2009 | 2004 Dodge Grand Caravan

2 Answers

Changing Rear brake pads 2005 dodge grand caravan


There are 2 bolts on the "inside" on the caliper towards the bottom they use an allen wrench socket.

May 13, 2009 | 2002 Dodge Grand Caravan

1 Answer

I need to replace the EGR valve.


No need to remove or move the alternator. You can get on the 10mm bolt with a short 1/4" socket and ratchet. Take the EGR tube off first, be careful not to lose the tube to EGR valve gasket. I usually use anti-seize when I put the EGR valve back on. That would be the mount bolts for the valve and the tube.

Mar 07, 2009 | 2005 Dodge Grand Caravan

2 Answers

2007 dodge grand caravan


according to the service manual there are two bolts hold the caliber to tthe adapter plate and the caliper should roll up and out. the only problem i could imagine is if the pads are hanging in the adapter

Nov 21, 2008 | 2005 Dodge Grand Caravan

Not finding what you are looking for?
2005 Dodge Grand Caravan Logo

Related Topics:

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...