I have an Iseki T600E tractor which both front wheels have locked solid and will not turn. This happened after a big "crunch" that seemed to come from the front of the tractor.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
pull the fuel pump and have it overhauled by a specialist diesel shop
the fuel is leaking past worn elements and shaft seals you could always put a tap in the fuel line just before the pump but that would mean remembering to turn it on and off for operations
Tractor, that is correct , Fixya has no Tractor catagory.
oddly , nor SEMI TRUCK tractors.
stored out doors? or IN?
seems this post is for stuck parking brake lever.
its rusted, replace the rusted parts.
or attempt to lube them.
same answer on all mech, parts. pure mech.
Check the oil in the transfer case. If it has lots of metal in it... time for a new one. They aren't the world's strongest.
Another check: Lift the front of the truck, while keeping the rear wheels on the ground. Engage the 4x4 switch (then turn the truck off) crawl under and try to turn the front driveshaft by hand. If it turns and the wheels turn, the transfer case is the problem if it turns but the front wheels don't... front diff issues. Any grinding, crunching etc is also a clue.
There's a problem with the steering shaft coupler. Ours did that and made a thunking sound too. Dealer covered it under warranty and put in a better shaft. I don't think a recall has been put out, but if you still have warranty, tell them to replace the steering wheel shaft while you can...
×