Question about 1998 Honda Accord
This tells you that you need your oil change to be changed if you got the eng lite on then you have problem with the eng
Posted on Jul 22, 2009
Read your manual under "Check Engine" it tell you how to get rid of the light
Posted on Jul 24, 2009
Check the maintenance may be there is a problem in it.
Posted on Jul 22, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Maintenance Required Light
The instruction is in your owners manual. I also perform my own maintenance. Well, here's the steps if you still haven't done it. Good Luck
Put the key into the ignition and press the odometer button. While holding down the odometer button, turn the key to the on position. You will see "-----"on the odometer display. It will count down "-----" "----" "---" "- -" "-". Then you will see zeros on the odometer display "000000". You can now release the odometer button. This will reset the maintenance light on your dash.
Posted on Mar 02, 2009
it comes on after a certain amount of miles
look it over check all belts hoses brakes fluids
and check the timing belt if all looks good put your key in the slot next to orange light and it will goto green again if you don't reset it will goto red in a few miles but it is not the check eng. light just a reminder
Posted on Jun 28, 2009
On the dim dashlights, there is usually a rotory switch that you can turn to increase the power to the dash lights. In earlier vehicles it was part of the headlight switch and you just turned it one way or the other to adjust the brightness. In newer vehicles it is a switch like a knob sticking out of the dash on its side that you push up or down to change the brightness of the lamps.
The Maintenance Required light is probable on because the vehicle has hit the 50,000 mile mark and it comes on automatically so that you take the vehicle in for maint. of the emission system. If this is the case there is usually a way to reset it untill another 50,000 miles go by. I would read the owners manual, or better yet pickup a Chilton manual for the vehicle and see if it says how to reset the light. You also may want to have the vehicle checked to see if any trouble codes have been signaled. Good Luck, RAC
Posted on Apr 19, 2009
this is just your maintence minder. the reset procedure should be in your owners manual. the vehicle calculates when its due for an oil change and turns the light on but it should be reset every oil change if its on or not. you can can your local acura/honda dealer and they can explain how to reset
Posted on Nov 03, 2009
SOURCE: what the srs light means
Here's a quick check list
for most common cost of SRS / Air bag problem.
Dirty contacts on driver and passenger seat belt buckles
Dirty contacts on seat belt connectors (under seats)
Dirty contacts on driver and passenger sides weight sensors (under seat)
Weight on passenger seat
(Example: grocery package trigger SRS / Air Bag light on the way home.)
I recommend you to pass an vacuum over the contacts and use CRC electronic parts cleaner to rule out connectivity problem.
I DO NOT recommend disconnecting the negative battery connector to clean the code(s).
Without the code(s) the dealer will takes "BILLABLE" time to reproduce the problem.
Please rate my answer if it is useful to you.
Posted on Dec 16, 2009
Tips for a great answer:
Jul 18, 2011 | Toyota Corolla Cars & Trucks
Feb 07, 2011 | Ford F Cars & Trucks
Jan 22, 2011 | 2007 Dodge Ram 3500 Quad Cab Laramie
Jul 08, 2010 | 1994 Honda Accord
Aug 25, 2009 | 1992 Honda Accord
Jul 30, 2009 | 2004 Toyota Camry Solara
Jun 28, 2009 | 1991 Honda Accord
Apr 19, 2009 | 1991 Jeep Wrangler
Dec 30, 2008 | 2006 Toyota Tundra
475 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: