Question about 1999 Acura CL

1 Answer

98 3.0 cl passenger window will not go up.

The driver side control does not work either. is it the motor? or I would appreciate any help

Posted by on

  • rdhomebase Jul 22, 2009

    I also checked the fuses and they checked out good. I do not know about the relay you mentioned. Where is it and how do I check to see if it is good or bad?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 305 Answers

Sound more like the relay or fuse, as this would stop the drivers side control as well as the passenger side

Posted on Jul 22, 2009

  • jim galbraith
    jim galbraith Jul 22, 2009

    the relays are usually beside the fuses, if not, check under the hood, there should be a black box,( like the fuse box ), all you need to do is swap the relay with the drivers side one, they will be the only 2 that have the same markings on them, if they are not under the hood, look under the dash at the passenger side footwell

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

04 Lincoln ls passenger front window control module


Might be engaging from the drivers side

May 01, 2014 | 2004 Lincoln LS

1 Answer

Only passenger side electric window works on 98 Lincoln Town Car. Where is the fuse or relay that controls the windows?


THE CHILD LOCK MAY BE ENGAGED IT IS BESIDE THE DRIVERS WINDOW SWITCH. OPEN THE DOOR ON DRIVERS SIDE. TURN ON THE KEY. ENGAGE THE WINDOW SWITCH IN THE DESIRED DIRECTION WHILE BANGING ON THE INSIDE OF THE DOOR ENOUGH TO JAR THE MOTOR

Apr 18, 2013 | 1998 Lincoln Town Car

1 Answer

1993 Bighorn Passenger window not working


There could be a lock controller somewhere that is not working.
I don't have a wiring diagram for your truck.

Generally, the power window motors are grounded thru the doors, or the switches provide ground. In your case the motors are probably grounded thru the doors.
The master switch "overrides" the door switch so you have extra wires that do the same thing. The E wire probably gives the door switch power and the A and C are up and down. The B and D are override circuits from the master that bypass the door switch.
Sometimes the motor is grounded thru the switch then thru the door.

Jun 28, 2012 | Isuzu Trooper Cars & Trucks

1 Answer

I have 2 problems that may or may not be related. My passenger window does not work and my blower motor does not work. I replaced the window motor/reg. still nothing. Tried both the driver side and...


first, make sure you did not accidently activate the window lock out swithc on the door controls. The relay is behind the fuse box, 2 of them, silver cans.

the blower motor is likely the blower motor resister in the plenum case, 2 screws, 10mm. lay on passenger floor and look up. it's near the round motor housing toward fireall.

go to the villager-quest yahoo grop website & join. read files, get free help.

gerry

http://groups.yahoo.com/group/villagerquest/

Aug 04, 2011 | 1997 Mercury Villager

1 Answer

1998 chavy Cavalier-all windows but drivers side dead


you have to run a power wire to the motor in the door and press up on the window button it should go back up if not then you need to change the button hook up or the motor

Mar 17, 2010 | Chevrolet Cavalier Cars & Trucks

1 Answer

Electric window drivers side not working


If the switch on the passenger side works, it should not be the relay. These switches are usually the fault, and can be dissasembled carefully and contacts cleaned. Theyre not that expensive anyway if I remember last time.
Other things to consider are the wires coming into the drivers door. make sure that one of them is live, and if you ascertain which on is the live, which the ground/earth, and what is the window motor one, you should be able to test the wiring.

Jun 01, 2009 | 2006 Peugeot 505

1 Answer

I have a 1999 dodge intreped. All windows excpect


I HAVE A 98 INTREPID AND I WENT TO A JUNK YARD AND JUST PULLED THE PASSENGER SWITCH OUT OF THE DOOR AND UNHOOK.WIRES....VERY EASY....PUT IN YOUR CAR AND THAT SHOULD WORK...ITS PRYS OUT OR PULL OUT WITH PLYERS....THESE SWITCHES CONNECT LIKE A CIRCUIT AND IF PASSENGER DOOR SWITCH IS BAD IT WILL NOT WORK FROM DRIVERS OR PASSENGER SIDE...98 TO 2000 ARE ALL THE SAME PARTS....HOPE THIS HELPS.....

Mar 05, 2009 | 1999 Dodge Intrepid

1 Answer

1994 Jeep Cherokee Power Window Problem


When you open the drivers door you can see a wiring harness between the door and the body of the car.
You more than likely have wires broken in there.

Jul 19, 2008 | 1998 Jeep Cherokee

Not finding what you are looking for?
1999 Acura CL Logo

Related Topics:

313 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...