Question about 2006 Chrysler 300

1 Answer

Where are the esp senors located on a 2006Chrysler 300 limited

The brake light and esp light wont turn off and when there on the speedometer wont work and the car feels like someone is pressing on the brakes the whole time im driving.

Posted by on

  • Anonymous Apr 01, 2014

    I haver to turn off engine then restart it to gain control of the situation

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,392 Answers

There are alot of things that will make those lights turn on. Get it checked at the dealer. Could be an ABS sensor/module, could be the steering angle sensor, or other things.

Posted on Jul 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Fault code c 1044


Think I found the solution or a thread discussing your Fault Code at Jeep Forum (Jeep patriot abs,4wd,esp,Trac control lights on after replacing rear wheel bearing) Jeep patriot abs 4wd esp Trac control lights on after replacing rear wheel...

Jan 07, 2016 | 2007 Jeep Patriot Limited

1 Answer

ESP DEFECTIVE, CHECK ENGINE, SPEEDTRONIC NOT WORK DISPLAY ON SPEEDOMETER SO PL GIVE ME COMPLETE DETAILS AND HOW MUCH ITS COST AND WHERE THEY ARE LOCATED


I googled: 2000 Mercedes-Benz E ESP DEFECTIVE
I recommend you see the many answers. There appears to be a big problem in this situation. You may find in MB site a diagnosis and a "fix" If you figure out what the problem is, and part you need, try Ebay for that part or thefind.com
Wild guess $200 to 300

Mar 11, 2015 | 2000 Mercedes-Benz E

1 Answer

Esp driving


location not stated, or road conditions. nor if in 4low , nor if the ESP switch is off or on. Ask Suzuki for help (lol) or any ASE shop.

it's not magic, it can not give traction , if none.
on ice slow down. (esp can do that too. slow you,brake you and even
shift gears in the transmission)

are you in 4wd? or high 4Low, esp is inactive. (or limited)
read the operators guide. (if lost, get one now)
read the page on driving on ice.
chapters 5,6,7.
have you had any off these conditions , related to ESP, this a
is the ESP light acting wrong, or CEL check engine light running?
are all dash lamps (warning) showing correctly per the opr. guide?
ESP & ABS are vary complex, (not magic)


quote from the servise manual. (car battery dead or disconnected?)
ESP control module
When ESP control module is removed / installed, do
not use impact wrenches which generate shock or
impact to avoid damaging sensors in ESP control
module.
Note that Calibrate word here..!
When any of the following operation is done, calibrate
steering angle sensor, G sensor and master cylinder
pressure sensor (in ESP control module) referring to
"Sensor Calibration in Section 4F
- When battery or dome fuse is removed. (
a low battery or weak)
- When steering angle sensor is replaced.
- When ESP control module is removed.
- When yaw rate / G sensor assembly is removed.



read this, it covers this system well,

http://www.wkjeeps.com/wk_esp.htm

read page 7-2 here (the do not drive words)
http://www.autodealertools.com/quickQuote/manuals/2007/Grand%20Vitara.pdf

this car has no center differential. (read limits there of)
are you using chains on the tires?
oper guide page 4-6 , read that yet?

If the vehicle speed is greater thanapproximately 30 km/h (19 mph), the ESP systems (other than ABS) will turn
on automatically and the light will go out.
When the transfer switch (if equipped) is
turned to the "4L LOCK" position, the

ESP systems (other than ABS) will be canceled automatically. The light will come on and stay on.
• If the ESP systems operate continu-ously such as when driving on slippery roads, the traction control functions of the ESP systems may be canceled temporarily to avoid overheating the brake pads, and the light will come on. After a short period of time, the ESP.

(this latter cut out happens, with wild driving)

Dec 05, 2013 | 2007 Suzuki Grand Vitara 4WD

1 Answer

2005 Jeep Grand Cherokee Limited all wheel drive with159, 960 miles. The ESP light and Service Electrical Brake System keep coming on. The indicator lights only come on while the vehicle is driving. Then...


check the bearing adjustment and brake pads for worn out check condition or brake rotors. Have the fault codes read and replace faulty items.

May 17, 2013 | Cars & Trucks

1 Answer

Have a vw touareg 2005, esp light stays on and car becomes absolutely impossible to drive. revs high to change gear and is not smooth in gear change.power shuts off in motion. have tried every thing but...


the esp light is caused by failure of the brake light switch in most models. check your brake light operation and replace the switch if the brake lights have failed. the switch is found in the footwell above the brake pedal

Feb 21, 2010 | 2005 Volkswagen Touareg

1 Answer

Hi I have a 2006 300 Chrysler 300 limited My abs light and the esp light stays on. What is causing the issue?


I have looked over the book, the only thing I could find that affects both of these systems is the "Anti-lock brake module". Doesn't look to be to big of a job, however it appears that this will be a dealer purchased part. I do not guarantee that is the problem, if possible you may want to have your local auto parts store hook it up to an OBD2 reader, with electrical systems this should quickly pinpoint the problem. Be aware their are two different types of modules on these cars (one per car), if you decide to purchase this, ensure they give you the correct part.

Hope this helps.

Feb 04, 2010 | 2006 Chrysler 300

3 Answers

My Mercedes ML 270 cdi ABS etc lights and gearbox.


  • you need a Brake safety switch replaced.This is located behind you brake pedal.it's a common problem. The warning lights will reset after a few engine starts.

May 18, 2009 | 2002 Mercedes-Benz M-Class

Not finding what you are looking for?
2006 Chrysler 300 Logo

411 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...