Question about 2006 Chevrolet Tahoe

1 Answer

All 3 brake lights went out on my 2006 chevy tahoe at the same time and the fuses are fine, any ideas?

Posted by on

  • wm1236 May 11, 2010

    Did you check the stoplight switch above the brake pedal? Most likely that or you have an short in the harness.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,776 Answers

Probably the brake light switch. It should be located below the brake pedal close to the firewall. When you push the brake pedal down, it activates the switch. The switch can be tested with an ohm meter or multimeter. Also look for damaged or disconnected wiring. Sure hope this helped and good luck.

Posted on Jul 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2002 Tahoe abs relay location


images for 2002 Tahoe abs relay location

Chevy ABS and Brake Dash Light fix - YouTube

? 24:15
https://www.youtube.com/watch?v=Jo76ylqgUR8
Dec 22, 2012 - Uploaded by Skizzot7
This is how to fix intermittent ABS and Brake dash lights on all Chevrolet ... That board is rather robust and is installed external to the vehicle in a location that sits .... I took the module out of a2002 Sierra and it is engineered with no T10 .... ABS Sensor and Harness 2000-06 Chevy Suburban Tahoe GMC ...

How I fixed a Chevy with an Abs and Brake light on - YouTube

images for 2002 tahoe wiring



Dec 09, 2015 | Cars & Trucks

1 Answer

Lower brake lights no longer work on my 2002 chevy tahoe but the 3rd brake light works fine. Checked fuse and bulbs and everything works fine. Just the 2 lower brake lights dont work.


Most of the time the problem is in the turn signal switch. The third brake light circuit bypasses the turn signals.
Someone would need to check brake light power in and out of the turn signal switch.

Feb 25, 2014 | GMC Cars & Trucks

1 Answer

Brakes Lights dont work on a 2006 Chevy Silverado


I've worked on these the first drove me crazy. its the turn signal switch every thing runs thru these. head lights, turn signal, brakes. except the third brake light. it runs directly from the brake switch. go figuare

Jun 22, 2010 | 2003 Chevrolet Tahoe

2 Answers

99 Chevy Tahoe... Rear turn signals, brake lights, and hazards


I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!

Oct 10, 2009 | 1999 Chevrolet Tahoe

1 Answer

Left rear turn signal, brake light and reverse not working


Did you ever figure this out? I've got the same exact problem with my tahoe.

Apr 11, 2009 | 1999 Chevrolet Tahoe

1 Answer

All brake lights went out on 2004 Chevy Tahoe


the most common cause of this is either a sticking 4 way flasher switch or the turn signal switch itself.

Apr 07, 2009 | 2004 Chevrolet Tahoe

4 Answers

2001 Chevy Tahoe with ABS & Brake light on.


I hope you have the problem fixed by now, but, it is the ABS control under the truck. You need to go under the hood and open the fuse box and disconnect the 60 amp fuse for the ABS, this will turn it off before it burns up. This however will also cause the traction assist off light to stay lit all the time. To the fix the problem you can pay tons of money ($700 or so) to have the dealership install a ABS control and the problem will happen again over time. Or, remove it yourself, go on ebay and ship it off to a guy who repairs them for about $150 and you will never have the problem again. Also, if you wrap your cable ends with plastic and protect them good, you can still drive you truck while the part is being worked on. It takes about a week.

Nov 12, 2008 | 2001 Chevrolet Tahoe

3 Answers

Brake lights not working


pretty common issue with the Tahoe/Yukon is the bulb holder...mine both went out at the same time as well...you can buy the bulb holder at any parts store, most have these on hand. They hold all 3 bulbs (lights, brakes/turn signal) and are a simple replace...most likely will fix your problem!

Jul 16, 2008 | 1999 Chevrolet Tahoe

Not finding what you are looking for?
2006 Chevrolet Tahoe Logo

324 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...