Question about 1998 Nissan 200SX

2 Answers

Car want start no lights work battery is good bu if i ground the wire going 2 starter then the lights work

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Check all your grounds and the Relay fuses under the hood and in the car and let me know if that helps

Posted on Aug 25, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 83 Answers

Check fuses and starter relay!!swampratt200!! AAAEEE!!!!!

Posted on Jul 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2005 honda civic VP bad starter replaced still engine not turning over


Check the ground connection on the battery and the frame. Make.sure the battery posts are clean and free from corrosion. Most likely it's the ground on the frame

Jan 11, 2014 | 2005 Honda Civic

2 Answers

2006 honda accord wont start


Have the batrtery tested by a parts store like Autozone, they do it for free and I am sure that that is the problem.

Jun 07, 2012 | 2006 Honda Accord

1 Answer

Truck won't start key turns get a click out of fuse panel checked breaker good battery test good power going to panel not to starter checked wire off battery to starter good Is their another bre


make sure all grounds are clean and area of metal that ground wire's bolt to are clean and rust free if that check's out ok there could be a break in a wire going to the starter and most starter's have two wire's going to them and those both need to have power going to them one drop's off when key is turned to starting mode volt meter work's good for this or test light or the starter could be bad

Mar 04, 2012 | 2004 Ford F150

1 Answer

97 Breeze electrical issue. Battery is fully charged, but won't start. Starter is silent, no relay clicks or other sounds. Instrument panel lights up. Windows and locks all work. I thought the...


percyhey, The first idea is to check the starter itself. You will need a test light for this procedure. Jack up the car and put jackstands under the frame to support it. PLEASE DO NOT go under the car with out them. Ramps would be easier and safer if you have them. Locate the starter and the little wire going to the solenoid. Remove the wire and find a good ground for the test light. The negative battery terminal is best if your test light wires are long enough. If not then use the body or engine as a ground and test this by touching the test light probe to the large wire on the starter and see if it lights up. If the small wire is bolted to the starter then you dont have to remove it, just make sure that it is intact. Touch the test light probe at the small wire and have someone try to start the engine. If it lights up then you have power going to the starter and the solenoid is malfunctioning and the starter needs to be replaced. Seeing that you have already tested the fuses and relays and replaced the ignition switch then this is the only possibility left. If you dont have power going to the solenoid then check the battery wires. Good luck with this.

May 08, 2011 | 1997 Plymouth Breeze

2 Answers

I have a 04 sedona. back in july the van didnt start so it did with a jump. after that it started when it wanted to so i replaced the starter. today it dont start tryed a jump got nothing. pt it in...


Could be a miss aligned switch try wiggling the shifter in park the next time it dose not start to see if starts.Also dirty battery cables will give you the same crazy makes no sense problems. Clean both the post of the battery and the cable ends and make sure they are tight. Your car needs a completely charged battery (14.2volt at the ignition) to start, were as the radio and other electronics, locks, windows, etc. only need a few amps. .

Sep 29, 2010 | 2004 Kia Sedona

1 Answer

2003 ford taurus how does you car sound when you try to start if your solenoid is bad just had starter replaced 1 year ago I don't know if it was a new starter or not but now car won't start battery is...


If you have a test light, you should check the small "tickler" wires on the starter relay. You do not know if the start signal is getting from the keyswitch to the solenoid. With the small wire detached you should be able to use a test light or 12volt meter on this wire. When you turn the keyswitch to start, the tickler wire should have power. If it does not, the ignition switch is probably bad.

If the tickler does have power, then clean the mounting surface of the solenoid and reconnect the wire and see if it works. If the car cranks you were losing the ground. If the car still does not crank put the test light on the cable going to the starter and ground the test light or gauge.

You will know there is power to the starter if the test light or gauge shows power from this connection. This means the solenoid is good and either the starter itself is shorted or has lost its grounding. Check all connections by the starter and try again.
If no luck the starter is bad.

May 02, 2010 | 2003 Ford Taurus

1 Answer

My lights and windows work but my car wont start


In order of probability:
1. Weak CURRENT level on battery (may show good voltage but no CCA left).
2. Bad/poor connect at terminals or ground wire on frame or battery wire on starter.
3. Starter - jump start with another vehicle - if that works, starter is fine.

Mar 07, 2010 | 2000 Ford Focus

Not finding what you are looking for?
1998 Nissan 200SX Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...