SOURCE: Cannot replace high rear brake light on 2006 Kia Optima.
go into the truck. there are 2 screws holding the stop light cover. it is at a place hard to get you hands in.
good luck
SOURCE: 2003 Toyota Sequoia Rear Brake Rotor Removal
You need to go into the access hole in the rotor and back off the park brake shoes, which are located inside the rotor.
SOURCE: Front wheel stud replacement for a 2006 Hyundai Sonata GL.
grind a flat spot on the round head of the new stud this should give enough clearance to install it. don't pull the hub this will damage the bearing.
SOURCE: 2006 Kia Spectra 5 rear brake disc replacement
One side,turns right,and push in slightly,and the other side turns left,to retract.
SOURCE: 2006 Kia Spectra 5 rear brake disc replacement
you need a special tool avalable at most parts stores. its a disc brake piston turning tool. you have to rotate piston clockwise while pushing in on piston. you can fabricate something that enguages the slots and push and turn till all the way in.make sure to note position of slots and put them in same place as was before or the pin on the pads wont enguage the slot
229 views
Usually answered in minutes!
×