Question about 1988 Chevrolet S-10

1 Answer

I have a 1988 s-10 with a 2.5l is getting no pulse from injector.but will run if u pour fuel in the tbi.both wires to the injector has constant power with key on or cranking it.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,071 Answers

Short to groun in a wire or the injector

Posted on Jul 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1993 Geo tracker fuel injector is not working right. i have to pour fuel into it. any suggestions on what i should do?


Important to know if it's not working at all, or if it is working some, just not enough? If not at all, then you need to check the injector wiring circuit, it's pretty simple really, just a hot wire with key on, and a ground wire that goes into the engine computer. Test with a voltmeter, best practice.

You should probably first check fuel pressure. The injector won't work unless the fuel pressure inside it is at the specified pressure. If the fuel pressure is too low, you have a bad fuel pump or a clogged fuel filter. If the fuel pressure is correct, you could have a clogged injector. The best way to clean that is with the injector off the engine.

Dec 09, 2015 | Geo Cars & Trucks

2 Answers

1988 Chevrolet k1500 350 v8 not getting signal to fuel injectors


So, it's the injector circuit. There is a 10 amp injector fuse in the fuse block, on left side, 4th one down. Check this fuse. It supplies constant power to both injectors, on the red wire to injector 1, and a white wire splice from this to injector 2. A steady 12 volts anytime key is in on, run, or start. You can check this with a test light or voltmeter. Ground the test light and probe injector connector's red wire on injector 1, and the white wire on injector 2-both should be hot with key on.
This may be why the noid light didn't blink. The noid light must have this steady power signal, and when the computer internally grounds the injector ground circuit for a split second, you get injector pulse-or a blinking noid light.
You can check the ground circuit separately with a test light also for each injector. Place the ground clip of test light on the POSITIVE battery post, and probe the blue (ground) wire on injector 1, the engine must be cranking over, and the test light should be blinking. Do the same for the green wire on injector 2. If the test light is blinking on both ground wires, with engine cranking-the ground circuit is good. You are sending power down the ground wire to computer, and when the computer grounds the circuit, the tester will light up-it will blink because the computer only momentarily grounds the circuit to cause pulsing of the injectors.

Feb 18, 2014 | 1988 Chevrolet K1500

1 Answer

1989 caprice with 350 tbi injectors won't pulse anymore


If you have spark, the computer is getting the signal to pulse the injectors.
If you have power but no ground pulse, you may have fried the driver in the computer again.
You could get a used computer from a junk yard to test it.
There could be a short in one of the injectors or the harness at the computer, or a break in the circuit from the computer, and that could kill the driver in the computer.

Jan 18, 2013 | Cars & Trucks

2 Answers

1989 K1500 was running fine and just quit. Not getting gas but I can hear the fuel pump start when I turn the key on. took fuel line off of TBI and seem to have plenty of gas flow but nothing comes out of...


you need to have the fuel pressure checked with a gage and volume as if its not at the spec the injectors won`t open to spray enough fuel.also you should check the injectors for proper voltages and ground as if these are not within specs then the injectors won`t work either

Oct 17, 2011 | 1989 Chevrolet K1500

1 Answer

I have a 1993 chevy s10 4.3l TBI that will not start.


Make sure the injectors are pulsing. Whatch to make sure mists oj fuel are coming out.

Apr 01, 2010 | 1993 Chevrolet S-10

1 Answer

350 with TBI intermittent injector pulsing


this could be a bad ingnition module or a loose wire. but i think on this truck the injectors do get singnal from the ecm

Jan 06, 2010 | 1987 GMC Suburban

1 Answer

Chevy S-10 Start problems


If hall effect switch was bad you wouldn't get any spark.What year 2.5L is this?Is this a 2 injector Throttle Body? The pink wire on top of injectors comes thru a 20Amp fuse controlled by the Ignition switch you should have battery voltage with key on The dark green and dark blue wires come from the pcm which are called injector drivers the drivers supply a pulsating ground if you crank the engine with a test light between either pink/dk green or pink/dk blue test light should flash dimmlythat would mean injectors are being driven but there isn't any fuel at the injector or the injectors are bad no pulse means either a bad computer ( which these drivers are known for going bad)or the computer isn't being commanded to fire the injectors.

Aug 22, 2009 | 1988 Chevrolet S-10

1 Answer

No power tp the fuel pump, injectors not pulsing, no fuel.


Check out your oil sending unit, fuel pump and relay, check for power (might be a fuse), the ignition control module (which if you remove it, can be tested for free at AUTO-ZONE), any related wiring, pick-up coil (inside the distributor), and possibly the ignition switch. If I can be any more help just as away.

May 28, 2009 | 1994 Chevrolet Caprice Classic

1 Answer

89 s10 has fuel fire everything fine except injector pulse


have you checked the wiring diagrams on the repair manual?

Feb 19, 2009 | 1988 Chevrolet S-10

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...