Question about 2006 Peugeot 604

1 Answer

Glow plug light on dash does not light up on my peugeot 807 but still starts is this normal

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,071 Answers

Light only comes on when it is cold enough for glow plugs to work they are not needed when air temps are 60 or better so this may be what the issue is if there ws an issue the check engine light would be on

Posted on Jul 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of glow plugs in my peugeot 807 executive 2ltr please


They are located in the cylinder heads most likely under the valve cover.

Oct 26, 2016 | Peugeot Cars & Trucks

1 Answer

How to remove seats from a Peugeot 807


fronts are bolted in ,move seat back and forewards to gain access ,rear seats should lift out to turn into a van,,, think you lower back tilt seat then pull a lever or a strap ,my galaxy comes out easy but getting them back in ,,,,so heavy

Dec 01, 2015 | 2005 Peugeot 807 2.0

1 Answer

Have peugeot 807 which sometimes will start no problem other times nothing all lights come on in dash thats it any ideas thinking of replacing battery


From what your describing I say it's probably a bad ignition switch. The electrical portion of the ignition switch is usually made from plastic. Over time (constantly going from off to on (power to the dash lights etc) then to the crank position they will crack and that's why your getting the no start sometimes. Next time it won't start try wiggling the key around a little. But it also could be the starter. First thing you need to determine is if your battery is good ( meaning does it have enough amperage to start the vehicle. If you are able to remove the tops of the battery and check each cell, using a hydrometer will tell you if the specific gravity is good. Sealed batteries can be load tested. You could even have a loose battery terminal end and cleaning the battery posts and inside the terminal ends will do the trick. Good Luck!

Nov 05, 2015 | Peugeot Cars & Trucks

1 Answer

The glow plug light is constantly on the dash on my peugeot


check the glow pulg relay, this may be bad, i would start there first,once the car is started theres no need for glow plugs they are used to start the car and thats it,when the light is on test to see if the glow plugs are getting power if so check the wiring and relay,this is not good for the glow plugs to be powered up so long, that rely must be cooked.

Jun 16, 2010 | Cars & Trucks

2 Answers

Peugeot partner wopnt start replaced glow plug


what voltage u getting ?. did it just stop and then not restart. if its getting fuel and glow plugs are working the next two items id look at is the cam shaft and crank shaft position sencors. also make sure ur battery is in good condition, so starter motor is turning fast enough to build up the correct pressure on the rail.

Dec 12, 2009 | 2005 Peugeot 405

2 Answers

I have just bought a peugeot 206 Hdi and the coil light dosn't go


glow plug light should just flicker as not needed until -6 stop light stays on when off until started

Apr 04, 2009 | 2005 Peugeot 405

1 Answer

Won't Start & No glow Plug Light on Dash


I am with a similar problem...

After putting on a new sump i found that the starter motor would work cranking the engine but no power is going to the glow plugs. The light on the dash does not appear either.

The relay for the coils does click but that is the end of it. I have a suspission it is the imobiliser but after taking the battery on and off several times to reset... still nothing.

There is fuel, good battery (fully charged), fuel lines are clean pressurised...

Any ideas???

Feb 11, 2009 | 1991 Peugeot 405

2 Answers

I have a citroen xantia 2.0 hdi,glow plug light goes out to quickly not on long enough,problem still there even after new glow plugs were fitted, would apreciate help thanks.


have you tried the glow plug relay? or if you have a test light see if theres power to glow plugs when light is on,should only light for 5 or so seconds.some of the newer hdi dont even use the glow plugs till temp is very cold,i have a 2006 2.0 hdi van and glow plug light only stays on for a second or so,and its been like that from new! is the problem just bad starting? and is it only when its cold? if you have a manual priming pump for fuel under bonnet,trying pumping before starting it could be fuel prob?ie air getting into fuel system

Nov 02, 2008 | Peugeot 604 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

766 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...