Question about Dodge Stratus

2 Answers

1996 dodge stratus runs fine till u drive it for a half hour or so then stalls..ran code reader was showing p1391 intermittent loss of cmp or ckp so i changed the cam sensor now its not showing any codes but does the same thing...any help would be appreciated

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,559 Answers

Have a compression test done while the engine is warm,It sounds like you have a valve sticking open sometimes or maybe even a burnt valve.

Posted on Jul 21, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,071 Answers

Crank sensor probably cracked heat expand the crack and vehicle stahls

Posted on Jul 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I got a 2002 dodge stratus and it won't stay


thats the cam and crank sensors, i usually replace them both when one is bad, usual for the cam sensor to go bad on the 2.4 engine

Sep 23, 2014 | 2002 Dodge Stratus

1 Answer

98 dodge avenger p1391 code, had no start first with no code and replaced dist..didnt fix it..then replace crank sensor and that worked..ben running fine for a year..now all of sudden runs crappy and...


Check connections to crank sensor, then reset your comp by disconnecting your battery cables and holding them together. Make sure to have the code cleared as well.

P1391 (M) Intermittent Loss of CMP or CKP Loss of the Cam Position Sensor or Crank Position sensor has occurred.

Apr 14, 2013 | 1998 Dodge Avenger

2 Answers

Im getting code P01391 but don't know what it is?


P1391 is Electronic Brake Control rough road data not usable.
The data the computer is reading from the wheel sensors (maybe) is out of normal range.
I would clear the code and see if it returns.

Jun 28, 2012 | 1998 Dodge Dakota

1 Answer

What do code p1391 mean


P1391 means intermittent loss of CKP and CMP , these sensor are monitor when the engine cranking,or running,These can come from a damage flex plate for the cranksensor or damage tone wheel for the camsensor,to a failing cranksensor ,failing camshaft sensor, to even the harness intermittent connnection

Mar 12, 2012 | Cars & Trucks

1 Answer

Code P1391, replaced camshaft and crankshaft sensors, plugs and wires, rotor, and a couple fuses, can a loose or bad distributor be the cause for this code?


DIAGNOSTIC TROUBLE CODE (DTC) P1391: "INTERMITTENT LOSS OF CMP OR CKP"
This DTC is monitored with the engine cranking or running. This DTC will be stored in the Powertrain Control Module (PCM) when the PCM FAILURE COUNTER reaches 96 failures for 2 consecutive trips.
Posiible causes are: Craknkshaft Position (CKP) sensor improperly installed, defective CKP sensor, defective distributor, defective Camshaft Position (CMP) sensor, defective PCM, defective or broken flywheel, defective connectors or defective wiring.
Proper diagnosis is recommended before replacing ANY parts.

Oct 21, 2011 | 1999 Dodge Dakota

1 Answer

P1391 cmp sensor or lost of cmp


DTC P1391 - Intermittent Loss of CMP (Camshaft Position) Or CKP (Crankshaft Position) sensor

Your Crankshaft or Camshaft sensor is not working properly. Needs to be checked out and maybe replaced; first try checking the wiring and harnesses (very common failures).

May 18, 2011 | Dodge Caravan Cars & Trucks

1 Answer

Engine fault code P1391


that is: Intermittent Loss of CMP or CKP which means intermittent loss of crank sensor or cam sensor signal most likely something a dealer or tech needs to repair.
Hope that helps, if this was accurate please give a thumbs up so others know too

May 15, 2011 | 1996 Chrysler Town & Country

2 Answers

The car bucks and dies after it gets warmed up and gives me code P1391 how do i fix it?


P1391=Intermittent loss of CMP or CKP,
Thats the cam sensor or crank sensor,

Jan 14, 2010 | 1999 Dodge Intrepid

1 Answer

Need the fix for code p1391


http://www.obd-codes.com/trouble_codes/dodge/

Intermittent Loss of CMP or CKP

http://en.allexperts.com/q/Chrysler-Repair-807/2008/3/problem-P-1391.htm

Jan 12, 2010 | 2000 Dodge Dakota Quad Cab

1 Answer

96 dakota p1391 error


intermittent loss of ckp or cmp.problem is in the distributor.make sure rotor not loose or distributor hold down bolt loose.camsensor on the distributor.also check to see if crank sensor is loose and out of adjustment.

Jun 07, 2009 | 1995 Dodge Intrepid

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

843 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...