Question about Cars & Trucks

Open Question

How to fit a new on off switch - Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix my altonator cos it switches off the fan when engine is running


will start all sorts of electrical failures if not fixed
buy a new alternator and fit it

the battery must be very low also (may need a charge )

if over 5 years old ..fit a new battery

May 19, 2016 | Cars & Trucks

1 Answer

New batteries fitted.NO response from set???


morning Taff could you tell us on what

Sep 28, 2014 | Cars & Trucks

1 Answer

Vw golf mk4 brake light switch works but not when fitted


next time you fit it adjust the mount that it goes into it may be getting pushed through it rather than just pressing the plunger if you cant adjust the mount try wrapping a cable tie around switch to hold it in place

Apr 17, 2013 | Cars & Trucks

1 Answer

Ignition barrel went on my 01 scenic


if you replaced ignition switch lock cylinder you have to reprogram the new key and ignition switch lock cylinder to the immobilizer control module and ecm.

Nov 16, 2011 | Cars & Trucks

1 Answer

How to replace the brake light switch?


most brake light switches are mounted under the dash right at the brake pedal arm. usually you have to disconnect the fitting from the switch and dismount it from the bracket that is holding it in place and put the new one in and plug the wiring fitting back into place.

Oct 28, 2010 | Geo Prizm Cars & Trucks

1 Answer

I need to know how to replace the window switch on a 1997 cadillac deville


hi if your talking about the window switch in the door then all you need to do is get a flat bladed screwdriver and gently pry it up as they are only pushed in once its up you can unclip the wires and fit the new switch.

if you buy the new switch first then you will be able to see what i mean about it being a push fit.

let me know if you need further assistance ok
plz rate this solution as i have whole page of unrated posts

Aug 25, 2010 | 1997 Cadillac DeVille

1 Answer

Golf low beam doesnt work but high beam does high works on both settings


check fuse first, then, fit new bulbs,then, if that dont work, fit a new column switch arm.(high beams have a relay,low dont.)

Jul 26, 2010 | 1995 Volkswagen Golf

1 Answer

How do i fit head light swich in.


If you have the standard pull out push in switch, reach underneath the dash and push in on the small button on the switch (look at the new one and you will see it...looks like a small rivet head with a spring under it) While holding the button in, pull the knob and shaft out, then just remove the nut around the switch extension and remove/unplug the switch. Once the new one is in, just push the knob back into the switch and it will lock in.

Feb 12, 2010 | 1995 Jeep Cherokee

1 Answer

Wiring front fog lights to a 2002 freelander ES.


Do not fit these lights yourself,you must take the vehicle to the dealer to have it done .Firstly as vehicle wasnt factory fitted you need the original homoglonation certificate from the manufacturer for the model with the foglights fitted,then you need a installation project drawn up by certifide auto engineer with the relevent technical qualifications (i have them) then they can only be fitted by a garage with an added value tax certificate,then vehicle must be presented to the local vehicle inspection depot to be mechanically inspected all over weither its due or not,the relevant paperwork plus the fee presented ,then a new vehicle registratrion document issued showing the changes.Failure to to this will cause the vehicle to fail its inspection when next presented as paperwork isnt correct ,the lights are ilrevelent as to weither they work or not,but if fitted from new they must work.Also if stopped by the guardis civil and paperwork checked,and they notice then you risk having the vehice impounded their and then on the spot ,big fine and the cost of the removal truck.

Mar 15, 2009 | 2002 Land Rover Freelander

1 Answer

Jaguar xj8 will not start.


how old is the car, and how old is the engine you fitted.
later engine require old flywheel as crank senors are different.

Mar 11, 2009 | 1998 Jaguar XJ8L

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...