Question about Cars & Trucks

Open Question

Hai we got C80MX -2RH CENTAC we were trying to start it it keep on tripping it says STaRter FAILLER what should we check?

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Pt cruiser wont start. checked battery, starter , releighs and ignition, and they seem fine. no codes come up when turning the key 3 times

To do self diag on a pt u need to start with ignition off. Hold trip button in for the odometer keeping trip button held down turn ignition key to run then release trip. This will also run a self test on instrument cluster. Codes will be displayed in the odometer at the end of test

Nov 01, 2016 | Chrysler PT Cruiser Cars & Trucks

1 Answer

What make engine continue to turn over after you take your hand off the key.but will not start?

One problem at a time the selenoid on the starter is stuck that it keeps turning over time for a new starter that could be the hole problem the starter could be taking all the power away from the rest of the system start their good luck

Jan 07, 2015 | 2007 Saturn Ion

1 Answer

When i try to start the engine it won't start, but the starter keeps running.

Yes starter is spinning but it has to be engaged.Its not engaging.The problem is with starter system.Get the flywheel checked.
Its suggested to get the starter system removed and checked. If all checked ok,then it can be fuel or ignition issue.

Click the link below To Troubleshoot the problem:-

This will help.

Sep 22, 2013 | 2005 Chevrolet Colorado

1 Answer

2008 jeep wrangler, sometimes when I try to start, it will click but not start. I keep trying and finally it will start. replaced the battery and had the starter checked. what else should I try

it sounds like the starter is going out even though it may have checked out ok it still could have a bad spot in it also check all your connections. Also when it does this put a test light on the signal wire at the starter (the small wire) and make sure your getting power there when the key is in start position. If there is power but no start you got a bad starter provided you got battery power to the starter too

Jul 10, 2012 | 2008 Jeep Wrangler Sahara

2 Answers

My starter keeps activating after ive started it. i put a new starter in and a new relay in. what else could be wrong?

Could be the ignition key/lock assembly hanging up in the "start" position. I think the older model GMC's have an adjustment on top of the steering column. A trip to your local library in the automotive section will have some repair books on this model (Chilton, Haynes...).
Good Luck.

Feb 06, 2011 | 1998 GMC Safari

1 Answer

I replaced the starter motor. Now when I try to start it, it won't do nothing. No crank no start. Even the dashboard has no signal. Battery checks out and cables okay.. Is it the starter relay? Where is...

The starter relay is usually attached to the starter, this is where the cables are connected to.
If the dash has no power, there is either a wire not back in place , or it may have tripped a breaker on the positive cable if it has one.

May 23, 2010 | 2000 Ford Taurus

1 Answer

Changed fuel pump and fuel filter, now x5 2002 won't start

1. use scanner to find out if there's trouble code.

2.. it's not clear if the starter (motor) turns as you try to start the engine, if not, check starter motor including intermittent (maybe) problem with the ignition switch.

3.if starter motor turns everytime you try to start: check the electrical ignition system: coils & spark plugs

Apr 30, 2010 | 2002 BMW 5 Series

1 Answer

Won't start after driving it on a trip 70 miles or so...after waiting about a half hour starts right up..

check the starter. the next time this happens tap on the starter case and then try to turn over.check wiring and fusible links, relays, fuses

Oct 04, 2009 | 1998 Ford Explorer

1 Answer

Starter/solenoid prob?

Replace the MAF sensor. The starter is overheating due to cranking excessively. It has noyhing to do with the engine staying running. The MAF sensor is located as the first sensor out of air cleaner. It controls the fuel. Good luck and have a safe trip.

Jun 18, 2009 | 1993 Ford Explorer Limited

5 Answers


My tercel keeps ticking when I try to start it.. Could it be the starter??

Aug 30, 2008 | 1995 Toyota Tercel

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides