Question about Cars & Trucks

1 Answer

Hi, after I replace the car batt., My cobra 4160 alarm can't work. (Mean can't lock or unlock the door during pressed the both button). How we can solve it (T_T)..Thank you and appreciate.

-Cobra 4160 c/w touch key. -After replace car battery can't lock or unlock even replace the new remote battery.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 40 Answers

Check for a reset button for the alarm under the dash.

Posted on Jan 04, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I press my central locking on my key fob for my Land Rover Freelander 2003 TD4 Diesel , only the rear door can be opened, when I press to lock ALL doors they lock and when I try to unlock them with...


Procedure for 2002 Land Rover models:
1. With the doors shut and from inside the vehicle.
2. Turn ignition to position 1 and back to off within 5 seconds
3. Remove key from ignition and press and hold the unlock button (has
an arrow on it) for 15 seconds during this time press the key lock button
(has Land Rover logo)3 times within 5 seconds
4. Release both buttons
5. Doors will lock and unlock to show correct programming has occurred hope this helps

Jan 05, 2015 | Cars & Trucks

5 Answers

Security light flashes and it won't start


top
CODE ALARM SYSTEM
information is always subject to change and correction Used on:
Impreza 1996-2001
Legacy 1995-1999
Forester 1998-2000
codealarmremote2.jpgBattery GP-23A
Lock: Left button will lock all doors. Double chirp indicates locked.
Unlock: Right button will unlock driver's door only. Hold unlock button app 6 seconds, it will unlock all doors including rear gate. Single chirp indicated unlock.
If the car chirps or lights flash 4x the alarm was triggered.
Panic. Press both buttons to activate emergency honk and flashing lights.
Valet mode: With optional alarm only Press the red alarm button on the left of the steering wheel. The light will quickly double flash. To re-set back to normal mode, press the red alarm light button again

Battery failed and lights flashing?
Parking lights will flash when the vehicle's battery is disconnected and reconnected.
To stop lights from flashing, either:
Press remote transmitter “UNLOCK” button once OR turn the ignition switch to the “ON” position and press programming button for one second (see below).
The vehicle interior (courtesy) light and door open warning light (DOOR AJAR indicator) will then illuminate for 60 seconds when the ignition is turned off, or until the doors are locked with the remote transmitter. Yes, the dashboard instrument panel lights will flash when the parking lights flash.
Programming or Overriding the Alarm when you have lost the remote
Open driver's door.
Turn ignition key to 'On'
Press and *hold programming button* in (see diagram, button under dashboard)
After 15 seconds the the door locks will cycle 3 times. Do not release Programming button
Press lock (left) button the remotes to be programmed. The door locks will cycle one time.
Exit programming mode by releasing Programming button under dashboard and turning key to off.

codealarmremote1.jpgCode Alarm Programming Button is under dashboard on the kick panel by the driver's left knee, left of the steering column. If you can't find it, it might still be tucked up in the wiring harness higher up in that same general area. The botton is recessed in a plastic ring (see diagram).
This button must be pressed while programming remotes or if the battery was disconnected and the lights are flashing.
top

Jul 10, 2008 | 1996 Subaru Legacy

1 Answer

Keyless remote


hi Alan

what procedure you are doing for remote matching?
try this one and let me know.

1 Unlock the car, get in and close the door

2 Switch ignition on

3 Press the door lock button on the dash to lock the car

4 Press and hold the door lock button on the dash, the alarm will beep

5 Keep holding the door lock button on the dash, press and hold the lock on the remote,

the alarm will beep

Repeat (5) for the other remotes,

6 leave the door lock button on the dash, the alarm will beep, switch ignition off

Feb 13, 2014 | Suzuki Cars & Trucks

1 Answer

Help !!!!. I have a 1997 Range Rover 4.6 HSE. After leaving it standing for a while the battery went flat. I disconnected the battery and charged it fully. When I reconnected it to the car all of the doors...


Some one brought his vehicle to me the other day with same problem. What i did was connected the battery and got inside locked the doors and removed the main fuse. This reseted the ordeal somehow. When i got outside i locked the door again and that was that. No alarm. How ever, i did install a new battery to the handset and tried again without any problems. Hope this helps.

Aug 29, 2013 | 1997 Land Rover Discovery

2 Answers

2003 Montero Sport Remote (FOB)


HI Kemp you might have too reprogram your key fob
check your owner Manuel for how to program key

Sep 09, 2012 | 2003 Mitsubishi Montero Sport

1 Answer

Reset computer for Audi after batt went flat


with the key in the door,unlock the car/hold key over for 30 secs,then lock/hold key over for 30 secs,then press/hold unlock button on remote for 30 secs,you have just reset the alarm/immobiliser system.the car will then start in the normal way....

Apr 26, 2010 | 1997 Audi Cabriolet

2 Answers

I need to reset my car alarm on my 02 vw golf. the battery has been replaced so alarm wont unlock doors


stick key in driver door lock and unlock it. If that works, now see if the remote will unlock the door or doors..i remember reading in an owners manual once where you can program which doors open and close by they way you press and hold down the two main buttons, also after a battery change in the remote, i think, but not sure, i did this on a blazar i once owned... the owners manual said, that you had to be within 20 feet and press and hold down both buttons till it makes the arming sound.... Can i get some feedback cause im curious..thanks.

Apr 04, 2010 | 2002 Volkswagen Golf

1 Answer

I have 2007 kia the doorlocks are locking on there own when you open passenger door and make noise plus tpms light is on since my sensor was replaced after I bought new tires


TRY THIS PRESS REMOTE TRANSMITTER LOCK BUTTON ACTIVATES ALARMS AND LOCKS ALL DOORS.NOW PRESS REMOTE TRANSMITTER UNLOCK BUTTON DEACTIVATES ALARM AND UNLOCKS ALL DOORS AND TRUNK LID.IF VECHICLE UNLOCKED AND DOORS OR TAIL GATE NOT OPEN WITH IN 30 SECONDS LOCKS AND ALARM ARE REACTIVATED.IF YOU STILL HAVE TROUBLE WITH DOOR LOCKS THE DEALERSHIP HAS TO FIX.

Feb 15, 2010 | 2001 Kia Sportage

1 Answer

Remote starter does not work but will unlock and lock doors.


depending on your alarm which it sounds like a viper model maybe? on my 02 you have to incorporate a factory alarm bypass module in order to be able to start the truck, they run about 100.00 bucks and have to be profssionally installed. The truck wont start because the computer isnt recieving the proper starting sequence due to the factory alarm

Jan 11, 2009 | 2003 GMC Sierra 1500

3 Answers

Program remote control for mazda mpv 2002


Courtesy of: forums.mazdaworld.org

Try this, it works on several 2002 models:


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the drivers door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the drivers door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done

Dec 06, 2008 | 2000 Mazda MPV

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...