Question about Nissan Cars & Trucks

Open Question

Were dose timing marks borth camcharft and crankcharft facing For Nissan 1400

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where do you find the timing marks on a nissan hardbody diesel

You find them on the faces of the timing sprockets and the crankshaft pulley

Dec 08, 2016 | Nissan Cars & Trucks

1 Answer

After we replacing timing chain this not starting,what could be the problem.

I'd say the timing marks are not as they should be. This means the chain is not quite in the right position on the camshaft sprocket(s), relative to the crankshaft.

Jun 08, 2015 | 2006 Nissan Micra 1.4

1 Answer

Where are the timing marks for a 1998 Nissan sentra gxe

most vehicles have a crank timing mark which sit on the crank pulley,its the big pulley at the bottom of the motor
the cam pulley should also have a mark on the pulley if its belt driven that should line up with a notch on the head or tappet cover
if its chain driven you will need to remove the tappet cover and your cam sprockets will have marks on them that must line up facing each other or facing level with the sides of the head

Mar 25, 2015 | 1998 Nissan Sentra

1 Answer

I need to know how to line up all the timing marks on 97 Nissan pickup with 2.4l ka24e 12valve engine I'm doing a head job & putting new timing chain oil pump I have never done one before on this type of...

they are pretty much all the same line up your 2 camshaft marks with your crankshaft mark they should all facing the same direction ,if you look on ebay I will bet your problem is solved there , good luck

Sep 21, 2014 | Nissan Cars & Trucks

1 Answer

Nissan 1400

distributor cap and rotor problem - there is your problem. If you do not put those suckers back in the same exact position, with the exact same markings, it will cause the car to fire the spark plugs at different times, causing miss fire and some times no firing at all.

Jan 04, 2014 | Cars & Trucks

3 Answers

How to put fiat pacer timing belt

Please I need to know how to replace Timing Belt on Fiat Uno Pacer 1400 and need to know how to set Timing. Is so difficult to answer my question

Oct 19, 2013 | 2006 Fiat 124

1 Answer

With the motor on # 1 tdc and the lower chain installed what position will the cam shaft dowel pins be facing up ??? on a 1999 nissan altima 2.4 liter i need a illustration can you help

The marks on the sprockets should face each other. Take a straight edge and line it up between the centers of the crank and cam. and the timing marks. Everything should line up perfectly.

Jan 30, 2011 | Nissan Altima Cars & Trucks

1 Answer

Ive got a 1400 nissan and is heavy on fuel. i fitted a new nikky carburator... plz help

The carb fitted, is it brand new? Second hand new or bought at Eddie's? Not to dis Eddie's but for the most part carbs from them are rubbish. Get it cleaned out, focus especially on the emulsion tube(that long removable tube with a whole lot of little holes drilled in it) Primary main 105, secondary main 140 to 150.(140 more economy,150 more power) Don't go less than 140 or you'll be running too lean and burn valves. Double check your ignition timing and the vacuum line between the dizzy and the carb. Poor ignition timing also makes these engines very thirsty. Check the weights in the distributor for free movement. A good dose of Q20 into the distributor will be well recommended.
Since this little bakkie is unique to SA Id recommend trying some local forms as well, such as Carforums and Nissan Owners Forums.

Aug 26, 2010 | 1983 Nissan Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

77932 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides