Question about Land Rover Range Rover
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Good day Jill, log on to www.radio-code.com You can get the instructions and code to get your radio working again. There is a small fee, but it's much better then the dealer and you get to keep the radio code and instructions so the next time you have to replace the Battery and you have the same problem you can address the issue. But just in case you have to replace the Battery, make sure you have the radio turned off. Good luck and keep me posted, be glad to know if you got your radio working again.
Posted on Jul 22, 2009
My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I have only been a free contributor to this site for the past 4-months.
Not sure if this what you need for the "P38" but it is for the 1996 Range Rover.
I do not know if you still need this information, but I am going ahead and answering it anyway.
Click on the following Link. It has the several Serpentine Belt Diagrams, one of which matches your specific vehicle with your particular options (AC, Power Steering etc..).
Standard Rule to Removal the Serpentine Belt:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Rotate/Move the Tensioner away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
Standard Rules for Installing the Serpentine Belt:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.
Let me know if this helped...
Posted on Mar 13, 2010
Tips for a great answer:
Jul 07, 2018 | Rover Cars & Trucks
May 22, 2018 | Rover Cars & Trucks
Jun 03, 2012 | Land Rover Evoque Cars & Trucks
Nov 25, 2011 | 2007 Land Rover Range Rover Supercharged
Jul 06, 2009 | 2008 Land Rover Range Rover Sport
Apr 21, 2009 | 2004 Land Rover Range Rover
Dec 30, 2008 | 2000 Land Rover Range Rover
Jun 29, 2018 | Land Rover Cars & Trucks
79 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: