Question about 2004 Nissan Murano

1 Answer

2004 Nissan Murano will not start

Was driving and the car decelerate while my son was driving. After he pulled off he shut off the car and now it won't start

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Nissan Master
  • 946 Answers

Sounds like fuel pump failure if it has fuel in tank. don-ohio

Posted on Jan 04, 2017

  • 3 more comments 
  • Todd FLEMING
    Todd FLEMING Jan 04, 2017

    Not the fuel pump, it just goes click once when you turn the key and everything kinda fades, no further activity. Battery is fully charged. Almost like the solinoid in the starter kicks but the starter does not send age at all

  • Todd FLEMING
    Todd FLEMING Jan 04, 2017

    "Engage at all"

  • don-ohio Jan 10, 2017

    I'd be calling NISSAN service manager to get some idea of the problem. They sometimes know the solution and can set you on the right trail over the phone. don-ohio

  • Todd FLEMING
    Todd FLEMING Mar 19, 2017

    Thanks Don but the problem was a bit more extreme....the number 1 lifter bearing exploded and shrapneled the engine, new engine required

  • don-ohio Mar 20, 2017

    Whoa! Sorry to hear that Todd! don

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bbtoast
  • 319 Answers

SOURCE: 2004 NISSAN MURANO CODE P0442 EMISSION

Please check out this article for further info.

Let us know if you notice any of these problems.

Brian

Posted on Aug 14, 2008

insanegtp
  • 112 Answers

SOURCE: 2004 Nissan Murano How do you clear maintenance light after oil change?

press maintanence button until you see engine oil, then hold trip/reset button... :)

Posted on Oct 03, 2008

  • 1 Answer

SOURCE: 2004 Nissan Murano, back door can't open

I had a similar problem with a sienna and sometimes the cable ( inside the door) between the handle and the latch gets stuck in the sleeve. Kind of like the brake cable on a bike.
take the panel off by removing all the screws you can see on the panel and pull the panel off. There will be plastic pins holding it. Some of them may pop off and some will break off.
Drip oil down the sleeve so the cable slides freely. I used bike chain oil. Do not use WD40. This is **** and will not work for very long. Try the handles a few times before you put the panel back.

Posted on Mar 03, 2009

TwinTurboZ
  • 78 Answers

SOURCE: 2003 SL Nissan Murano 150,000 miles. After driving

most likely it is the transfer case leaking. known problem on the AWD models. they leak right down on the exhaust and causes the burning smell. have it checked out again.

Posted on May 14, 2009

  • 2418 Answers

SOURCE: 2004 nissan murano low 3 quarts oil. no sign of a

Hard city driving during the hot summer can and will cause a bit of oil usage. 1 qt in 500 miles is not excessive. If you recently changed oil and are using a different brand this also can cause a bit of oil usage, due to the engine getting used to it. Add to full and keep a good ck on it, it should level out. if not check your air filter, pvc valve, and any vaccume hoese. 

Posted on Sep 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2004 Nissan Murano that loses aceleration completely while driving.The vehicle crank well and start but loses acceleration after just 15 minute of driving,then I have to pack and start again...


There should be a check engine light on.You will need to retrieve the diagnostic coded from the computer to help you pin point why this is occurring. Go to autozone they will do this for free.

Feb 23, 2015 | 2004 Nissan Murano

2 Answers

2004 nissan murano,my doors don't lock when i engage drive


it did before and do you have a after market car starter install check all fuses could have a broken wire at transmission connection or shifter but try the fuses first does the door locks work normal or not

May 05, 2014 | 2004 Nissan Murano

1 Answer

My 2004 murano do not drive when engaged on drive, what is the problem


run fault codes and look for TCM fault or a torque converter clutch servo/ solenoid failure.

Dec 22, 2013 | 2004 Nissan Murano

1 Answer

Murano starts shaking when I accelerate pasts 30 mph. Check engine light came on


Drive to Autozone,they will scan for free and tell you what code comes up and what is wrong.

Feb 20, 2013 | Nissan Murano Cars & Trucks

1 Answer

2004 murano


Temporary fix until you find someone who knows.
When you pull into your place to park the car for the night, or whatever, go ahead and unhook the battery. Re-hook up the battery when you are ready to drive it again. That will at least keep you from not driving it at all.

Jan 12, 2013 | 2004 Nissan Murano

1 Answer

Car Stalls and shut off after taking in for routine oil change. i've take my 2004 Nissan Murano in to local shop to get an oil change. After a couple of day or so the car appears to loose power and...


COULD BE TOO MUCH OIL IN VECHICLE FOULING OUT THE SPARK PLUGS.OR BY BAD LUCK YOUR OIL PRESSURE SWITCH MALFUNCTION CAUSES YOUR CAR FUEL PUMP SHUT OFF TO KEEP ENGINE FROM LOCKING UP DUE TO LOW OIL PRESSURE.

Jul 05, 2010 | 2004 Nissan Murano

1 Answer

How do you adjust the main and power steering drive belts on a 2004 Nissan Murano. Is there a torque spec for the adjuster?


there is spring loaded pulley and auto self adjusts tension,, if belt is loose then tension pulley needs to be replaced

Jul 08, 2009 | 2004 Nissan Murano

1 Answer

My 2005 Nissan Murano SL AWD keeps shutting off!!!?!


Sounds like the alternator is not charging, take it to the dealer.

Oct 16, 2008 | 2005 Nissan Murano

Not finding what you are looking for?
2004 Nissan Murano Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...