Question about Cars & Trucks

2 Answers

I have a 2012 Taurus. Tried to enter own code-won't work.Tried to open with original code. Won't work. With key in pocket touch any numbers on pad and car unlocks. Can you help?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 75,108 Answers

You need a dealer (or well equipped shot) to scan into the system and see where the fault is, without the special scan tool there is nothing you can do other than guess and that can be very expensive.

Posted on Jan 03, 2017

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 14,585 Answers

Most likely is because the fob is within range of the security on the car. Security would have to be scanned to see any problems.

Posted on Jan 03, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Key won't come out of ignition on 1999 vw jetta


IGNITION KEY WILL NOT RELEASE

It can be faulty ignition lock cylinder. I suggest to wiggle the steering wheel a bit and see if the key gets released out. If that is not helping then first turn steering wheel to right and try removing the key, or next turn steering wheel to left and see if you can remove the key.

----------

Spray wd-40 in the ignition key hole and let it remain there for few minutes, after that once again try to remove the key and see if that helps.

---------

But if that is not helping then ignition lock cylinder has to be removed out and key has to be manually removed.

-----------

For more troubleshooting on these types of issues, I suggest you to refer the help links mentioned below. Its the accurate solutions mentioned in it. That will help you to narrow the problem: -----

Click the link below: ------


-----------

1999 Toyota Camry: Key Will Not Come Out Of Ignition?

http://whatisbyme.blogspot.in/2012/05/1999-toyota-camry-key-will-not-come-out.html

---------------

2001 Toyota Tacoma: Ignition Locked?

http://technoanswers.blogspot.in/2012/04/2001-toyota-tacoma-ignition-locked.html

------------

Ignition Switch Will Not Turn Off?

http://schematicsdiagram.blogspot.in/2012/04/ignition-switch-will-not-turn-off.html

-----------

Car will not turn the ignition to start?

http://technoanswers.blogspot.com/2012/01/car-will-not-turn-ignition-to-start.html

-----------

Ignition Key OFF but engine still running?

http://howtobyme.blogspot.in/2012/03/ignition-key-off-but-engine-still.html

--------------

Chevrolet Malibu: Key Stuck in ON position?

http://technoanswers.blogspot.in/2012/04/chevrolet-malibukey-stuck-in-on.html

2012 Dodge Ram: Ignition Key will not release?

http://whoisbyme.blogspot.in/2012/07/2012-dodge-ram-ignition-key-will-not.html

-----------

Ignition locked up on Mercury Villager?

http://technoanswers.blogspot.in/2012/01/ignition-locked-up-on-mercury-villager.html

-------------

Key won't turn in the ignition on Toyota land cruiser?

http://technoanswers.blogspot.in/2012/02/key-wont-turn-in-ignition-on-toyota.html

-------------------

How to remove ignition switch on VW Car models?

http://schematicsdiagram.blogspot.com/2011/12/how-to-remove-ignition-switch-on-vw-car.html

-------------

How to Replace Ignition Switch on Chevrolet Caprice Classic?

http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-ignition-switch-on.html

-----------------

1995 Ford Taurus: Ignition switch not turning OFF?

http://repairhelpcenter.blogspot.in/2012/06/1995-ford-taurus-ignition-switch-not.html

-------------

Ignition Problem Troubleshooting

http://whoisbyme.blogspot.in/2012/07/ignition-problem-troubleshooting.html

------------------

These will help.

Thanks.

Feb 15, 2013 | 1999 Volkswagen Jetta

1 Answer

I have a 98 Chevy Malibu Ls and the ignition won't


Inspect the old ignition cycle which is out.Is there any problem noticed of Ignition cylinder getting worn out.
Because when issue of ignition not turning off,its faulty ignition lock cylinder or faulty ignition switch.I suggest re-inspect the new ignition cylinder.
For more help,click the help link mentioned below:----

Ignition Switch Will Not Turn Off?
http://schematicsdiagram.blogspot.in/2012/04/ignition-switch-will-not-turn-off.html
----------------

1995 Ford Taurus: Ignition switch not turning OFF?

http://repairhelpcenter.blogspot.in/2012/06/1995-ford-taurus-ignition-switch-not.html

-------------

Ignition Problem Troubleshooting

http://whoisbyme.blogspot.in/2012/07/ignition-problem-troubleshooting.html

------------------

These will help.

Thanks.

Feb 04, 2013 | Cars & Trucks

2 Answers

1997 taurus key won't turn in the ignition, gear selector won't go into gears


Usually a sign the tumblers in the lock cylinder have worn out or jammed.
You may have to get the lock cylinder drilled out and replaced.

Jan 13, 2013 | 1997 Ford Taurus

2 Answers

Front right side hit . replaced concerter and won't crank over /or start fuel pump doesn'd even come on when key is on ?


ricks63toy, I believe that Ford still uses what is called an inertia switch even in the hybrids. This switch will shut off in the event of an accident shutting off the fuel pump. This is a safety feature built into the vehicle. Seeing that this is a newer vehicle I trust that you still have the manual. If not, the switches are usually located in the trunk. Look on the side walls of the trunk and see if you can locate it. It is usually marked by a sticker. When you find the switch, push the red button down until you hear a click. This will reset the switch and allow power back to your fuel pump. Good luck with this.

May 17, 2011 | 2010 Ford Fusion Hybrid

1 Answer

I need to change my door codes on my 92 nissan maxima


1991-94 Nissan Maxima key less entry reprogramming:

1. The *original code found on the gold box under the glove compartment by the left kicker panel
(there should be 3 sets of codes on the gold box the code u want begins with the letter F and has 7 digits.) (_EXAMPLE_ F# S1234567 )

2. Close and lock all of the doors,
enter the 7 digit code ( make sure you have your key in your pocket not inside any key hole).

3. Once the code is entered correctly you will hear a long beep.
While the beep is sounding ... ENTER your NEW 4 digit code, (you will then hear random beeps)
>>>>>>>>>>>>>Do not touch anything until the beeping stops.
________After the beep is over______
4. T
ype: S or ST (Clear) and the New 4 digit code and the door will open automatically.
~~~~~~~> NOW YOUR DONE YOUR CODE HAS BEEN RESET.
5. If you forget your new code. Just enter the original one and start all over.
Its really simple I hope it helps...............

Mar 21, 2011 | 1993 Nissan Maxima

1 Answer

How to reset 93 nissan maxima keyless pad when there is no code to be founded or is it somewhere on the car.


1991-94 Nissan Maxima key less entry reprogramming:

1. The *original code found on the gold box under the glove compartment by the left kicker panel
(there should be 3 sets of codes on the gold box the code u want begins with the letter F and has 7 digits.) (_EXAMPLE_ F# S1234567 )

2. Close and lock all of the doors,
enter the 7 digit code ( make sure you have your key in your pocket not inside any key hole).

3. Once the code is entered correctly you will hear a long beep.
While the beep is sounding ... ENTER your NEW 4 digit code, (you will then hear random beeps)
>>>>>>>>>>>>>Do not touch anything until the beeping stops.
________After the beep is over______
4. T
ype: S or ST (Clear) and the New 4 digit code and the door will open automatically.
~~~~~~~> NOW YOUR DONE YOUR CODE HAS BEEN RESET.
5. If you forget your new code. Just enter the original one and start all over.
Its really simple I hope it helps...............

Jan 29, 2011 | 1993 Nissan Maxima

2 Answers

Theft light blinking/car won!t start


jump the

Starter solenoid

on the passenger fire wall with the key in and on the on position. if the truck starts change it... theft-light-blinking-car-won-t-start-rbr12kxjqsqvwnu2khrshnjz-4-0.jpg

Jun 27, 2009 | 1999 Ford Expedition

1 Answer

I won a 1997 volvo 850 and i just got it from


You can get the code from the dealer with the VIN# and you have to pull the radio out to get the radio's serial number. If you've tried too many wrong codes the screen will show error message. If so - disconect the battery for about 60 minutes to clear error message then reconnect and enter correct code

May 09, 2009 | 1998 Volvo S70

1 Answer

Combination on car keypad does not open doors


Does the key pad on the door light up? Are there any tears in the key pad numbers? Does the key pad lock the doors?.
There are no fuses directly for the pad.. The key pad is linked directly to the RAP. module. If the locks work from the FOB the fuses for the Module are good. Chances are the pad is no good especially if it don't light up. The RAP module is above the driver side foot well, directly above the accelerator pedal . Hope this helps.

Mar 09, 2009 | 1999 Ford Taurus

1 Answer

94 ford taurus electrical prob.


In the trunk on the trunk mount support there should a sticker with the original keyless code number, reinstall this number into your system and try it. The original number will reset the system.

Dec 27, 2008 | 1994 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...